Is Jio speed decreasing?

Is Jio speed decreasing?

Recently, Telecom Regulatory Authority of India(Trai) has updated its ‘MySpeed’ portal for February 2021. To be specific, the Jio has achieved an average 4G download speed of 15.4 Mbps. Which seems to be a drop from the earlier 17.9 Mbps in January 2021 and 20.2 Mbps in December 2020.

Has Jio network improved?

Jio has now surpassed the 99\% 4G Availability milestone with a 0.5 percentage points increase since Opensignal’s last report. However, Vi and BSNL’s scores increased significantly by 5.1 and 3.5 percentage points to 89.2\% and 61.1\%, respectively.

Why is Jio the worst network?

A report by OpenSignal said that, Jio has the slowest 4G LTE average speed in India. OpenSignal, in its report, said that the main reason for Reliance Jio’s performance was the volume of 4G data people have been consuming on its network.

READ ALSO:   Is IFSC code and IFS code same?

How to increase reliance jio 4G download speed?

One solution that will definitely work is locking the LTE network to Band 3 (1800 Mhz), 5 (850 Mhz) or 40 (2300 Mhz). This way, the Jio or any other 4G network users can lock the LTE band to frequency specific to that band. Also Read: How to Increase Reliance Jio 4G Download Speed by Changing the APN Settings

How many bands does Jio support?

Jio supports the three bands to offer a higher speed and better coverage to the users, but there are issues with the same. When it comes to speed, Jio gives 50 Mbps speed in the Band 40 with a frequency of 2300 Mhz, 18 Mbps speed in the Band 3 with 1800 Mhz and Band 5 with 850 Mhz frequencies.

Does Jio unlimited internet work with Jio SIM?

But the main backward is Jio unlimited internet only work on where reliance provides their 4G services. This means you should have a 4G network with Jio sim, and your device should be VoLTE supported.

READ ALSO:   What happens when you take a hard drive out of a computer?

How to increase Jio 4G speed for Mediatek processor?

Steps to increase Jio 4G speed For MediaTek processor. Install MTK Engineering Mode from play store. Open and Run the application. Then select ‘MTK Settings’. After that Select ‘BandMode’. Select SIM slot where you have placed your Jio SIM. Select ‘LTE mode’. Select band 40 for best speed or band 5 for best coverage.