Table of Contents
How do I fix E4 error in IFB washing machine?
The problems that are user correctable are – power and water supply, cleaning of the inlet hose and the coin filter. Switch off the machine, reset the program to OFF and then try again. If the problem is not solved, well, you need to call the service centre.
How do I fix E4 error on washing machine?
When the washing machine shows error E4, the washing machine doesn’t get water or too little water to run the program. First, check whether the faucet is open properly. If it’s open, check the water supply. The inlet hose may be clogged or kinked.
What does E4 error mean?
The E4 fault indicates that the unit is going into defrost mode, and somehow it causes your unit to malfunction, and the result is the system gets too cold. There is the chance that a defective temperature sensor causes your AC to go into defrost mode.
What does E4 mean on a washing machine?
Water supply error
What does the error code means and how to fix it?
| New Code | Old Code | Cause |
|---|---|---|
| E4 | E1 | Water supply error. The appliance is not detecting that the unit is filling with water. |
| 4E1 4E2 | 4Ed | Water temperature issue |
| 5E | E2 | |
| 6E | Water heater not functioning |
What does E4 mean on a Haier washing machine?
Haier Combination Washer/Dryer – Error Codes
| Fault Code | Description/Reason |
|---|---|
| E1 | Washer cannot drain the water within 4 minutes |
| E2 | Cannot lock the door after 20 seconds |
| E4 | After 8 minutes, the selected water level has not been reached. |
| E8 | Water level above the warning level |
What does E4 mean on a hot tub?
PCU E4 Error Code Print If the heat is not manually reactivated, the heating will not begin and the water temperature will drop in cold conditions, triggering an E4 (water too cold) error.
What does E4 mean on Insignia washer?
What does the error code means and how to fix it?
| New Code | Old Code | Cause |
|---|---|---|
| E4 | E1 | Water supply error. The appliance is not detecting that the unit is filling with water. |
| 4E1 4E2 | 4Ed | Water temperature issue |
| 5E | E2 | |
| 6E | Water heater not functioning |
How do I fix error code 4E?
4E (4C) ERROR
- 1 Check that the water tap connected to the washing machine is open to full.
- 2 Check that there are no kinks or bents in the water hose connected to the machine.
- 3 Check to see if the water hose mesh filter is not blocked.
- 1 Turn off the water source to the washing machine.