Table of Contents
Pistons are buttons that can be pressed by the organist to change registrations; they are generally found between the manuals or above the pedalboard. In the latter case they are called toe studs or toe pistons (as opposed to thumb pistons).
What do the foot pedals do on an organ?
The pedals are primarily used to play the lowest pitched bass line of a score, and usually go down lower in pitch than the manuals by an octave or more. (On many organs, the pedals can also play up as high as the manuals with the aid of couplers and high registers, but such usage is infrequent.)
What are the foot pedals on a pipe organ called?
A pedalboard (also called a pedal keyboard, pedal clavier, or, with electronic instruments, a bass pedalboard) is a keyboard played with the feet that is usually used to produce the low-pitched bass line of a piece of music.
Where are the stops on an organ?
Stops are arrayed on the organ console, or control board: mechanical stops are usually knobs, and electric stops are usually tabs or buttons.
What are the switches on an organ called?
Stops/Stop Tabs – The colorful plastic (originally celluloid) switches shaped like tablets which are spaced around the horseshoe shaped console. They enable the organist to select different ranks of pipes (flute, violin, diapason, etc) and their low to high pitches (32′, 16′, 8′, 4′, etc.) .
Where is the expression pedal on a pipe organ?
As a rule the expression pedal it is located just above pedal (tenor) e and f. The normal position for the swell pedal of a pipe organ is fully open (the top of the pedal “to the metal,” like the accelerator of a car) in order to sound in proper balance with the Great division.
How do I fix a Hammond organ that won’t turn on?
Turn the “Power” switch off — and then turn it on again — if the keys or buttons on your Hammond organ don’t operate. Locate the switch on the back of your organ, next to the AC power cord inlet.
How do I Reset my organ to factory settings?
Locate the switch on the back of your organ, next to the AC power cord inlet. Turn the “Power” switch off again if the procedure does not work, but this time press the “Rec/Jump” button (which records presets), hold it in, and then turn on the “Power” switch.
Where can I find a service manual for my organ?
Schematics: You can most likely find the service manual or schematic for your organ for free online. I suggest trying to follow along with it as much as you can as you work on your organ, even if you don’t yet understand most of it. Vacuum: Once you open up the top of the organ, you’ll probably find that it’s very dirty inside.