Table of Contents
Where are GFCI circuits required?
The NEC mandates GFCI protection in many areas of the home: bathrooms, garages, outdoor receptacles, crawl spaces, basements, kitchens and anything within six feet of a sink or water source. While that may seem like a lot, the entirety of a home is not covered.
Are GFCI breakers required by code?
Kitchens: All receptacles serving countertop areas and any receptacle within 6 feet of a sink must have GFCI protection. Laundry, utility, and wet bar sinks: Where receptacles are placed within 6 feet of the outside edge of the sink, they require GFCI protection.
Do GFCI outlets require 20 amps?
The wires (electrical conductors) between the 20 amp rated circuit breaker and this GFCI outlet receptacle (or any outlet receptacle) must be at least 20 amp rated (gauge 12). It doesn’t matter if the end device is 15 or 20 amps rated.
When did GFCI become code?
Receptacles in the kitchen were first required to be GFCI-protected by the 1987 edition of the National Electrical Code (NEC), and initially only for counter receptacles within 6 feet of a sink.
What is code for GFCI outlets?
According to the Code, all receptacles (15 and 20 amp at 125 volts) in the laundry rooms need to have proper GFCI protection. The revision of the NEC done in 2005 requires that all receptacles within 6 feet of a sink or a wet bar need to be with a working GFCI protection installed.
Are GFCI outlets up to code?
What is the electrical code for GFCI outlets?
Electrical Code Definitions for GFCI Circuits and Outlets. NEC 210-8 At dwellings, ground-fault circuit interrupter (GFCI) protection shall be provided for all receptacle outlets installed in bathrooms, garages, grade-level portions of unfinished accessory buildings, crawl spaces, unfinished basements, at kitchen countertops, wet-bar sinks,
What is the Ohio residential electrical code for Ohio?
Ohio Residential Electrical Code Effective 7-1-19 Download Electric Code as PDF 4101:8-34-01 Electrical.
Where are GFCI breakers required in a house?
GFCI breakers and outlets have been around for awhile, and most people know they’re required in bathrooms, kitchens and outdoors. But our experts are still finding home electrical violations, especially in garages, crawl spaces, storage/work areas in unfinished basements, wet bars (within six feet of a sink) and sump pumps.
Why would a license electrician install a GFCI?
Explanation: License electrician is aware of risk and elimanate or prevent hazards from occurring. Hiring a electrician to install a GFCI can benefit with resolving other types of risk that may have a potential occurrence