Table of Contents
What is an FRL?
An FRL combines a filter, regulator, and lubricator into one component to keep air compressor systems in optimal working condition. FRL Components. An FRL has three primary components: Airline filter. Pressure regulator.
Which oil is used in FRL?
FRL Lubricating Oil, Grade: 20W50
| Grade | 20W50 |
|---|---|
| Density | 0.66 g/cm3 |
| Physical State | Liquid |
| Packaging Size | 1 Liter |
| Flash Point | 40 Deg C |
How do I fill my FRL oil?
Filling the lubricant First, remove the oil bowl and fill oil below the maximum level. With pulling the stopper down, turn the oil bowl to either side to remove it. Re-assemble the oil bowl to the unit and re-connect the air supply. Pour oil in the same way or through the unscrewed lubricant hole from the next time.
How do I select a FRL unit?
FRL units ensure the air quality for your tools, optimizing tools performance and lifespan.
- Consider your environment:
- Select the right type of FRL.
- Include your airline installation thread & standards into the mix:
- Take into account the air flow needed by the tool:
Where is FRL used?
An FRL unit is comprised of a filter (F), regulator (R), and a lubricator (L). They are often used as one unit to ensure clean air in a pneumatic system but can also be used individually.
What is the need of FRL unit?
Answer: FRL Unit: It is service unit used in Pneumatic system which is combination of three devices named as Filter, Regulator and Lubricator. Function of FRL unit Filter (F) – 1) To remove the micron and sub-micron particles present in the entering air of compressor.
Why lubrication is needed in pneumatic systems?
Air lubricators have been an important part of pneumatic systems for decades. Lubrication helps reduce friction between sliding surfaces to not only improve efficiency and increase cycling speed of a component, but reduces wear, which ultimately means longer component life and less maintenance.
How should air lubrication be mounted?
Where should a lubricator be installed?
- Oil-mist lubricator should be installed within 5 meters of the application.
- Micro-fog type lubricator should be installed within 30 meters of the application.
- Always install downstream from a filter and a regulator.
What oil do you use for air tools?
Mineral oil that contains anti-foaming and anti-gumming additives work best in air tools.
What is the function of air regulator?
Air pressure regulators are used to provide a constant outlet of pressure, separately from the inlet pressure or flow. They are most commonly used to reduce the pressure level required for downstream equipment, stabilising the force applied to cylinders or minimising pressure variation.
What is the function of air receiver?
An air receiver, sometimes referred to as a compressed air tank, is an integral part of any compressed air system. The main purpose of this is to act as temporary storage to accommodate the peaks of demand from your system and to optimize the running efficiency of your plant.