Table of Contents
- 1 What size socket do I need to remove the oil?
- 2 How many quarts of oil does a 2007 Chevy HHR take?
- 3 How many quarts of oil does a 2006 Chevy HHR take?
- 4 What size is the oil drain plug on a 2007 Chevy Silverado?
- 5 Where is the dipstick on a Chevy HHR?
- 6 What does the tc light mean on a Chevy HHR?
- 7 How do you drain the oil from a heated car engine?
- 8 What type of oil do I put in my HHR?
What size socket do I need to remove the oil?
3/8-inch
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car’s engine to catch all the draining oil.
How many quarts of oil does a 2007 Chevy HHR take?
5 quarts
Capacity: 5 quarts (with filter)After refill check oil level.
Where is oil plug on 2007 Chevy HHR?
Drive the vehicle onto a pair of car ramps, and engage the emergency brake. Slide the tools and oil bucket under the engine. Place the bucket beneath the oil plug, located on the passenger side of the engine facing the rear of the vehicle. Loosen and remove the oil drain plug with the 15mm socket.
How do you reset the oil life on a Chevy HHR?
Turn the key to IGNITION ON (no engine start). Fully press and release the accelerator pedal slowly three times within five seconds. Turn the key to OFF, then start the vehicle. If the light or message comes back on when you start the vehicle, the OIL LIFE SYSTEM has not reset.
How many quarts of oil does a 2006 Chevy HHR take?
SAE 5W-30 is preferred. Capacity: 5 quarts. . . . (with filter)After refill check oil level.
What size is the oil drain plug on a 2007 Chevy Silverado?
The oil drain plug on a chevy silverado is 15mm.
What wrench do I need to change my oil?
Wrench. The most common tool used when changing motor oil is the combination wrench. This kind of wrench has both an open side and a closed side. The open end can be used to remove the wrench and position it on the nut.
What kind of oil does a HHR take?
Chevy recommends using 5 quarts of sae 5w30 synthetic motor oil in their hhr.
Where is the dipstick on a Chevy HHR?
The transmission dipstick on a 2006 chevy hhr is located next to the red cap for the transmission fluid.
What does the tc light mean on a Chevy HHR?
As a result, sometimes an issue in the ABS can trigger the traction control light. If this is the case, then both the ABS and Traction Control lights will be on. The sensors relay that information to the traction control module, which determines whether or not power needs to be shifted.
How to change the oil in a 2007 Chevy HHR?
Oil & Filter Change Chevrolet HHR (2006-2011) – 2007 Chevrolet HHR LT 2.2L 4 Cyl. 1. Getting Started – Prepare for the repair 2. Open the Hood – How to pop the hood and prop it open 3. Find Oil Drain – Locate the oil drain plug underneath the vehicle 4. Drain Oil – Set up the workspace, drain oil and replace plug
How do you open the oil drain plug on a car?
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine.
How do you drain the oil from a heated car engine?
Next, locate the drain plug under the car; it should still be warm from the heated engine. Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug’s nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine.
What type of oil do I put in my HHR?
Most Chevrolets have the oil type printed on the oil cap – it will likely be 5W-20, 5W-30, 5W-40, 10W-30 or 10W-40. If it isn’t printed on the oil cap, check your owners manual for the exact type before adding new oil. We recommend wearing safety glasses whenever you are working under your HHR.