Table of Contents
What is the maximum number of hops a RIP packet can take?
15
The largest number of hops allowed for RIP is 15, which limits the size of networks that RIP can support. RIP implements the split horizon, route poisoning, and holddown mechanisms to prevent incorrect routing information from being propagated.
What is the maximum hop count?
The maximum number of hops is 255.
What is default hop limit?
Yet the default setting for most devices is far higher than 40 HOPs. LINUX has a default HOP count of 64. And Microsoft, since the NT4 Service Pack 6 in 1995, has boosted its default HOP count from 32 to 128.
What is the maximum number of hops OSPF?
224
In the OSPF routing protocol, the maximum hop count is 224.
Why does Max 15 hops have rips?
The rationale behind keeping the maximum hop count low is the count to infinity problems. Higher max hop counts would lead to a higher convergence time. (I’ll leave you to wikipedia count to infinity problem). Certain versions of RIP use split horizon, which addresses this issue).
What is the maximum number of hops for RIP protocol if count to infinity is defined as 10?
15 hops
RIP has a maximum of 15 hops when routing packets to a remote network. These metric counts of hops to the destination determine the most efficient route; that is, the quickest path to the destination network.
What is IPv6 hop limit?
8 bits
Hop Limit – Indicates the maximum number of links over which the IPv6 packet can travel before being discarded. The size of this field is 8 bits. The Hop Limit is similar to the IPv4 TTL field except that there is no historical relation to the amount of time (in seconds) that the packet is queued at the router.
What is hop distance?
Hop is the logical distance between networks based on the number of routers that must be traversed by packets sent between them.
What is the maximum hop count of routing information protocol?
Hop Count : The maximum hop count allowed for RIP is 15 and a hop count of 16 is considered as network unreachable.
What is Eigrp hop count?
Similar to its predecessor IGRP, EIGRP has a maximum hop count of 224 and a default maximum hop count of 100. EIGRP has administrative distance of 90. This means its routes are slightly more trusted than IRGP routes and a lot more trusted than RIP routes that have an administrative distance of 120.
What is the maximum hop count limit imposed by RIP and RIPv2?
16 hops
RIPv2 allows for the summarization of routes in a hierarchical network. RIPv2 is still limited to 16 hops; therefore, the network diameter cannot exceed this limit. RIPv2 multicasts its routing table every 30 seconds to the multicast IP address 224.0. 0.9.