How do you determine the value of 5 band resistors?
The fourth band (or 5th for the 5-band and 6-band) indicates the tolerance values. Here, two colors are added (gold and silver). The 6th band for a 6-band type resistor is the temperature coefficient….Resistor Band Colors.
| Color | Value |
|---|---|
| Yellow | 4 |
| Green | 5 |
| Blue | 6 |
| Violet | 7 |
How do you read a 5 band resistor color code?
Always read resistors from left to right. – Resistors never start with a metallic band on the left. If you have a resistor with a gold or silver band on one end, you have a 5\% or 10\% tolerance resistor. Position the resistor with this band on the right side and again read your resistor from left to right.
What is the color code for a 5k tolerance 5 resistor?
The colors brown, red, green, blue, and violet are used as tolerance codes on 5-band resistors only….Standard Resistor Values and Color.
| Color | Green |
|---|---|
| Digit | 5 |
| Multiplier | 105 |
| Tolerance (\%) | 0.5 |
What is the 5th band on a resistor?
5 band resistor Resistors with high precision have an extra band to indicate a third significant digit. Therefore, the first three bands indicate the significant digits, the fourth band is the multiplication factor, and the fifth band represents the tolerance.
How do you determine the color of a resistor band?
The resistor color bands range from 3 to 6 where the first two bands specify the value of resistance & the third band is a multiplier….How to Read Resistor Color Code?
| Band Colors | Yellow |
|---|---|
| 3rd Digit | 4 |
| Multiplier | 10 k Ohm |
| Tolerance | ±0.5\% |
| Temperature Coefficient | 25 ppm/K |
What is the 4 color bands of the 470ω 5 resistor?
470 ohm resistor color code for 4-band is calculated as: (1st digit) = Yellow = 4. (2nd digit) = Violet = 7. (multiplier) = Brown = 1 = 10^1 = 10. (tolerance) = Gold= ±5\%
What is the color code for a 4.7 K resistor with 5 tolerance?
| Band | Value |
|---|---|
| 2nd Violet | 7 |
| 3rd Red | 100 |
| 4th gold | +-5\% |
| 4.7k Ohm tolerance: +-5\% |
How can you tell the value of a resistor using color code?
Reading and Determining the Resistor Value Hold the resistor with the gold or silver band to the right and read the color codes from the left to the right. Select the color codes from the bands on the resistor. Read the colors from left to right. The resistance value based on the color code provided is now displayed.
How do I find the Colour code of a resistor?
It consists of a set of individual coloured rings or bands in spectral order representing each digit of the resistors value. The resistor colour code markings are always read one band at a time starting from the left to the right, with the larger width tolerance band oriented to the right side indicating its tolerance.