Table of Contents
- 1 What is Point to Point Protocol and how does it work?
- 2 What is the significance of the name Point to Point Protocol PPP )?
- 3 Can Layer 3 protocols pass over Layer 2 PPP?
- 4 What performs the function of point-to-point connection between servers?
- 5 What do you mean by point to point network?
- 6 What performs the function of point to point connection between servers?
- 7 Is PPPoE an Ethernet?
- 8 How is the point-to-point network connected?
What is Point to Point Protocol and how does it work?
Point-to-Point Protocol or PPP is a layer 2 or data link layer protocol that is used to establish a direct connection between two nodes in a network. It can provide authentication, encryption, and compression. This protocol is used to create a simple link between two peers in a network to transport packets.
What is the significance of the name Point to Point Protocol PPP )?
In computer networking, Point-to-Point Protocol (PPP) is a data link layer (layer 2) communication protocol between two routers directly without any host or any other networking in between. It can provide connection authentication, transmission encryption, and data compression.
What is the PPP Point to Point Protocol and how does it work quizlet?
PPPoE (Point-to-Point Protocol over Ethernet) is a specification for connecting multiple computer users on an Ethernet local area network to a remote site through common customer premises equipment, which is the telephone company’s term for a modem and similar devices.
Can Layer 3 protocols pass over Layer 2 PPP?
PPP is a varsatile protocol and supports both synchronous and asynchronous links. The protocol Type filed in the header allows multiple Layer 3 protocols to be carried over the same PPP link.
What performs the function of point-to-point connection between servers?
The endpoint communication occurs through phone lines and modems and at these endpoints Point-to-Point Protocol (PPP) software is essentially a router for the physical network.
Is PPP protocol still used?
PPP (Point-to-point protocol) is a WAN protocol that is often used on point-to-point links. Nowadays it’s still used for DSL with PPPoE (PPP over Ethernet) and PPPoA (PPP over ATM). One of the advantages of still using PPP is that it allows authentication through PAP and CHAP.
What do you mean by point to point network?
A Point to Point Network is a private data connection securely connecting two or more locations for private data services. A point to point network can also be configured to carry voice, video, Internet, and data services together over the same point to point connection. …
What performs the function of point to point connection between servers?
Which of the following can be used by PPP for authentication?
Authentication services for PPP can be configured using either PAP or CHAP. HDLC is an encapsulation protocol for point-to-point serial links. LCP and NCP are protocols that are used for establishing PPP sessions.
Is PPPoE an Ethernet?
Point-to-Point Protocol over Ethernet (PPPoE) combines PPP, which typically runs over broadband connections, with the Ethernet link-layer protocol that allows users to connect to a network of hosts over a bridge or access concentrator.
How is the point-to-point network connected?
A P2P network uses different types of topology to connect two internet nodes via an internet connection. The nodes will then transfer data to each other via a full fibre line. A few small-scale examples of this are a two PC’s communicating via modems, a PC communicating with a printer via a cable etc.