Table of Contents
What is maintenance of injection Moulding machine?
What is mold maintenance? Mold maintenance, or tool maintenance, refers to the cleaning and repairs that are needed to keep an injection mold in the best working order. Maintenance is performed routinely over the life of the mold (preventative maintenance or PM), and also when any problems arise.
How many types of mold maintenance are there?
5 levels of plastic mold maintenance.
What is core pull injection molding?
Most of you probably have heard of the option “Core Pull” with Injection Molding Machines. Simply put, core pull allows a cavity to be put in the product parallel to the clamp. The important component is that the product being create must need a place devoid of plastic that cannot be accommodated by the mold itself.
What is the temperature of the hydraulic oil of injection molding machine?
Therefore, injection molding The hydraulic system of the machine should use hydraulic oil with good performance and high cleanliness. What is the temperature of the hydraulic oil of the injection molding machine? The ideal working temperature of the hydraulic system should be between 45 degrees and 50 degrees.
How to maintain the injection molding machine?
During the use of the injection molding machine, always check the pressure oil level, the pressure of the oil pump and the cleanliness of the pressure oil. When encountering wet weather, the concentration of the pressure oil must be checked daily, and the water pipes must be checked frequently to prevent water from being mixed in.
What happens if there is insufficient oil in the hydraulic system?
Insufficient oil will cause the oil temperature to rise easily, and the air will easily dissolve into the oil, which will affect the oil quality and the normal operation of the hydraulic system. Insufficient oil is usually caused by oil leakage or loss during repairs. For this reason, you should pay attention to check whether there is any leakage.
What is the ideal working temperature of hydraulic oil?
2) Hydraulic oil temperature: The ideal working temperature of the hydraulic system should be between 45 ℃ and 50 ℃.