Table of Contents
How do I fix idle control system malfunction?
What repairs can fix the P0505 code?
- Replacing the IAC valve and cleaning the throttle body and passages.
- Removing carbon from throttle body and IAC passages and clean IAC.
- Repairing a vacuum leak in the engine intake manifold vacuum system or gaskets.
How do you diagnose a bad idle air control valve?
Usually a bad or failing idle control valve will produce a few symptoms that can alert the driver of a potential issue.
- Irregular idle speed. One of the most common symptoms associated with a problematic idle air control valve is irregular idle speed.
- Check Engine Light comes on.
- Engine stalling.
How do you fix high idle after cleaning throttle body?
The idle will relearn if you put the vehicle in drive and allow the idle to come down with all accessories off for about two to three minutes. Then turn on your a/c with blower in high position for three minutes. This should fix it.
What does P0505 mean?
Idle Control System
Diagnostic trouble code (DTC) P0505 stands for “Idle Control System.” The code may be accompanied by erratic idle speeds that can lead to stalling and other issues. On most older vehicles, the idle control system relies on an idle air control valve (IAC) on or near the throttle body.
What does idle control system malfunction mean?
The code P0505 – Idle Control System Malfunction means that the engine computer cannot regulate the idle speed. The symptoms present with the code P0505 may include difficulty starting, hesitation, stalling, fluctuating idle, as well as too high or too low idle speed.
Can the idle control valve be cleaned?
Cleaning an idle air-control valve can keep you from buying a new part, but only certain idle air-control valves can be cleaned. The idle air-control valve must have a spring-operated valve for cleaning to make it work.
Can an idle control valve be cleaned?
Why is my car idle high after cleaning throttle body?
Cleaning the throttle body allowed more air to enter the engine, and the computer is compensating by adding more fuel. The idle will relearn if you put the vehicle in drive and allow the idle to come down with all accessories off for about two to three minutes.
Can a throttle position sensor cause high idle?
When a TPS goes bad, then the car’s throttle body won’t function properly. When the throttle gets stuck in an open position than your vehicle will receive too much air and cause it to have a high or fluctuating idle.
What happens when the idle air control valve fails?
The idle air control valve is programmed to regulate and maintain the engine idle speed at a constant rate. If the valve fails or has any issues it can cause the idle speed to be thrown off. This may result in an unusually high or low idle speed, or in some cases a surging idle speed that repeatedly climbs and falls.
Can a bad IAC valve cause hard starting?
Yes, a faulty air control valve can cause hard starting. Whenever you start your engine and the car idles, the throttle is closed, leaving the IAC valve to meter the proper amount of air to allow into the engine and maintain combustion. If it lets in too little or too much air, hard starting and rough idle often ensues.
How often should I clean my idle air control valve?
Cleaning your idle air-control valve periodically can keep your engine running smoother and will avoid premature replacement of the IAC valve, but note that only certain idle air control valves can be cleaned, that is those with a spring-operated valve. You won’t need to disassemble your IAC valve right away to clean it every time.
What causes irregular idle speed in a car?
Irregular idle speed. One of the most common symptoms commonly associated with a problematic idle air control valve is irregular idle speed. The idle air control valve is programmed to regulate and maintain the engine idle speed at a constant rate. If the valve fails or has any issues it can cause the idle speed to be thrown off.