Table of Contents
Can I put a higher HP pump in my hot tub?
If you want to up the water pressure coming from your jets, you can get a hot tub pump with higher horsepower than the unit that you’re replacing. HOWEVER, if you do decide to increase the horsepower, you only want to move up in increments (or magnitudes) of . 5 to 1.
Can I put a bigger pump on my hot tub?
The really important things to match are flow and head, they should be similarly larger than your 1hp pump. If you have 300 ft of head and 10 gpm, you can’t replace it with 100ft of head and 50 gpm, for example, both of which could be a 1.5 hp pump.
Can I upgrade the jets in my hot tub?
Home spas do require some maintenance from time to time, such as replacing the spa jets. Depending on the type of jets you have and where your system is located, this can be a quick and easy procedure. If you find that replacing the jets isn’t as easy as expected, it is best to call in a professional.
Can I replace a 48 frame spa pump with a 56 frame?
Almost all spa pumps are manufactured in one of two standard frame sizes: 48-Frame and 56-Frame. If you want to replace your wet end or your motor, you should use an equivalent of the same size, so that the mounting holes between the motor and the wet end align.
What HP hot tub pump?
Because there are so many different sizes of hydrotherapy jets, there is no hard and fast rule concerning pump size. In general, large jets (15-20 GPM) require 1/4 Hp per jet. Some jets are so small you can have a 1 Hp pump drive eight to ten of them. At the other extreme, some small swim spa jets require 1 Hp per jet.
How does a 2 speed spa pump work?
The pumps primary function is to circulate the water in the hot tub. There are normally two stages of water flow. One is called the circulation cycle whereby the pump generally spins at a lower RPM (around 1,750). Most tubs use 2 speed pumps whereby low speed is the circulation and high speed is the jet action.
What is a good HP for a hot tub?
How many watts is a hot tub pump?
The primary energy hog in a hot tub is the heater, which will draw around 1,500 watts or 6,000 watts, depending on whether it’s a 120-volt heater or a 240-volt heater. There’s also the water pump to consider, which usually draws about 1,500 watts.
Can I add jets to my tub?
You can quickly turn almost any bathtub into a whirlpool by attaching a portable water jet spa. Enjoy soothing water jets and massaging bubbles inside your home year-round by adding add a portable water jet spa system to your existing bathtub.
Are all hot tub jets interchangeable?
Many styles of hot tub jets are interchangeable as long as they are the same size. Most jets can be easily removed by turning them to the left and then they will pop right out. No matter what brand your hot tub is or if it has 4 jets or 40 jets, they can be the key to maximum enjoyment.
What is the difference between a 48 frame motor and a 56 frame motor?
Difference Between 48 Frame & 56 Frame Pump Hot tub pumps typically come in two different frame sizes: 48 frame and 56 frame. When replacing a hot tub pump, it is important to replace it with the same size pump so that the holes and plumbing will line up.
How long do hot tub pumps last?
When it comes to spa pumps, they naturally last from 5 to 10 years. The maintenance that goes into the spa and pump has a lot to do with the longevity of the pump. Think of yourself as your spa’s personal trainer, responsible for keeping it healthy and productive.