Is GE Profile worth the extra money?
As a general rule of thumb, GE Profile appliances are more expensive than their GE counterparts. This is because the GE line is a consumer entry-level family of products, meant to offer a generally good package at a generally good price point.
Why is my GE Profile refrigerator not getting cold?
Check the condenser coils to determine if they are dirty—if the condenser coils are dirty, clean them. The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is not working properly, the refrigerator won’t cool properly.
How do I reset my GE Profile refrigerator?
After performing basic checks on the refrigerator power and use, if the display still does not work, try a basic reset. Unplug the refrigerator and wait 30 seconds, then plug it back in to the circuit. This should reset the control panel and restore function.
Why is my GE freezer not freezing?
If the condenser coils are dirty or have not been cleaned in a while, clean them. The evaporator fan motor draws air over the evaporator coils and circulates it throughout the freezer. If the evaporator fan motor is not working, the freezer will not cool. If the compressor won’t run, the freezer will not cool.
Who makes GE Profile fridge?
Haier Group
It’s part of the global corporation Haier Group, which has six appliance brands. GE makes refrigerators, freezers, dishwashers, washers, dryers, water filtration systems, air conditioners, and water heaters.
What temperature should a GE refrigerator be set at?
between 35°-38° F.
Incorrect Refrigerator Temperature Settings GE suggests setting your refrigerator to the recommended temperature in your model’s use & care guide which should be somewhere between 35°-38° F. Use a refrigerator thermometer if your model doesn’t have a digital display that shows the current temperature inside.
How do you reset the code on a GE refrigerator?
Reset the code by pressing the System Check button. Repair or Check = Check defrost heater, defrost thermostat and the defrost timer. Press the System Check button to clear the error code.
Why is my freezer at 38 degrees?
This could be due to a malfunction of the defrost termination thermostat. This is the component in charge of turning off the defrost heater at the end of the defrost cycle, when the evaporator gets up to 38 to 47 degrees F. It can normally be found on the evaporator tubing.
What number should my GE freezer be on?
0°F
Recommended control settings are 0°F for the freezer and 37°F for the fresh food compartment. To view or adjust the current temperature settings, press the Freezer or Fridge pads or “Warmer” or “Colder” pads (depending on the model) until the desired temperature setting is displayed.