How many gallons per minute does a 15 hp pump?

How many gallons per minute does a 15 hp pump?

15 hp centrifugal pump with maximum flow 16.3m3/h (71.8 gpm), maximum head 81.2m (266ft) and same diameter of inlet and outlet 40mm (1-1/2 inch), can be used for high-rise building pressurized water supply, HVAC & refrigeration water circulation, etc.

What is Max suction in water pump?

The maximum suction height depends on the saturated vapor pressure of the fluid and therefore the temperature and ambient pressure. The maximum theoretical suction height of the water, at sea level, is about 10.33 meters. in practice we consider the NPSH of the pump and the pressure losses due to fluid flow.

How much lift does a sump pump have?

For most average-sized homes in areas with average water tables, a 1/3 HP sump pump should be sufficient. Typically, 1/3 HP pumps can handle 7′ – 10′ vertical lifts from the sump pit if they have one 90-degree elbow and a horizontal pipe run between 3 feet and 25 feet.

READ ALSO:   Is it normal for hCG levels to rise after a miscarriage?

How big of a pump do I need to lift water?

If the pump is at the top, it requires a suction capability which depends of the type of pump used. But a 15 foot lift is possible. The power of the pump is determined by the sum of the flow rate and the pressure. Pump size is a function of its capacity (GPM) and pressure capacity (PSI). A 7psi pump is required to lift 15 feet of water.

Is it possible to lift 15 feet of water?

But a 15 foot lift is possible. The power of the pump is determined by the sum of the flow rate and the pressure. Pump size is a function of its capacity (GPM) and pressure capacity (PSI). A 7psi pump is required to lift 15 feet of water. Motors and pumps have a certain efficiency and there is some loss of piping.

How much power does it take to power a 15 foot pump?

READ ALSO:   What do people in Italy eat daily?

Pump power required is the sum of the flow rate and the pressure. 15 feet of water is about 7psi. The motor and the pump have a certain efficiency and there are some losses in the piping. Assume the losses in piping and efficiency is 50\% that should get you close the the power required.

How much horse power do I need to pump water?

Horsepower theoretically required for pumping water equals the gallons per minute multiplied by the head in feet, and divided by 4.000 For power recommended, divide by 2000 instead of 4000.