Table of Contents
Can I use an 18V battery in a 20V drill?
There is no reason the 18V tool can’t run on 20V without an intermediary circuit. As long as the Lithium batteries are charged on a DeWalt lithium charger you are safe and the tools will run fine on 19 volts – the actual no-load voltage of a charged DeWalt lithium battery.
Can I use a higher voltage battery in my drill?
Just a general warning. You could probably use a lower voltage battery in a higher voltage tool as long as the batteries physically interchange (like the Festool drills), but never the other way, using higher voltage battery than what the tool specifies as you will likely do damage to the tool’s motor.
Can I replace a 18V battery with a 20V battery?
This adapter will allow people with 18V stem top tools to use the newer 20V MAX batteries. The 20V batteries will not charge on the 18V chargers however using this adapter, so the user will also need a 20V MAX charger.
Can you use an 18V battery on a 12v tool?
Answer: Buy a 12v battery with a higher amp hour rating. The 12v and 18v batteries are not interchangeable.
Can I use a 20V battery in a 18V Dewalt drill?
3/3/16 Update: If you are using DeWalt 18V compact drills with model number DC970 or DC759, you should only use the following 20V batteries with the adapter: DCB201, DCB203, DCB203BT. DeWalt 20V lithium ion batteries promise 33\% more capacity than other standard 20V batteries, as well as virtually no self-discharge.
Does higher voltage battery mean more power?
A higher voltage battery has the potential to “push” more current–that is, more electrons–for a given resistance. This translates to the capacity for greater work, which is the same thing as more power. Higher voltage also means less current to do the same amount of work, so longer battery life.
Can you use a different battery on a Dewalt drill?
No, the tool was created to work with specific voltage.
Is Dewalt 20V and 18V the same?
20V MAX is the Same as 18 Volts Nominal – Proven by DeWalt Look for the DeWalt asterisk. 20V Max equals 18V nominal voltage. On both DeWalt and Craftsman tools, you’ll notice their packaging marked 20V MAX*.
How do you reduce voltage from 18v to 12V?
To reduce the voltage variation you could configure two resistors as a voltage divider. The lower shunt resistor (R2 in the circuit below) helps to hold the voltage down under light load, and permits a lower value for the upper series resistor (R1) which reduces voltage drop under heavy load.
Will a 20v battery work in a 24v tool?
Answer: No, each voltage line 20v and 24v have their own set of interchangeable tools and batteries but are not interchangeable across different voltage line.
Can I use a 20V battery in a 18V drill Black and Decker?
Answer: Yes, all of our 20V BLACK+DECKER batteries and chargers are interchangeable within our 20V BLACK+DECKER product line. Question: Can this battery replace my 18V B&D nicad batteries?
What is the difference between 18V LXT and 18V hammer driver-drill?
In comparison, 18V LXT Hammer Driver-Drill pioneered by the new 4.0 Ah battery has the ability to drill 25 holes, compared to 18 holes by the 3.0 Ah battery-powered drill They are compatible entirely with 18V LXT and 18V Compact cordless tools that come with the star symbol.
What is the best cordless power tool battery for mag drills?
The Milwaukee M18 cordless Mag Drills are much faster than their competitors while also providing the stronger magnetic hold. However, you can keep your cordless power tool battery interchangeable tools lightweight and run stable with these high-capacity battery packs.
Can you use Porter Cable batteries on other power tools?
According to some sources, this battery also allows you to use it on other brands of power tools such as Guild, Erbauer and Titan which mostly Positec-manufactured tools. Porter-Cable 20V Battery Compatibility Are porter cable 18v and 20v batteries interchangeable? Porter-Cable is another well-known tool brand.
Is the DeWalt 20V battery compatible with other brands?
Using in on other brands also is not recommended as it is not compatible. Is it interchangeable with Dewalt 20V batteries? The answer is strictly no. The reasons are pretty much the same. The electronic components in those two batteries varies and trying to use it on each other tools may cause your tools to be damaged.