Table of Contents
Why is there no 9 mm wrench?
A VW engine could be dropped and split using only three sizes of sockets/wrenches. Most people have 3/8 socket in English size or a wrench and 9mm is a bit smaller yet close enough for a 3/8 socket to work in it’s place.
What is a 9 mm socket used for?
The CRAFTSMAN Metric 1/4-in drive 6-point 9mm shallow socket is a one-piece solution to stubborn nuts and bolts. This socket features an innovative high-torque design that lets you release and fasten nuts and bolts without rounding off corners and stripping heads.
Do they make 9mm bolts?
The 9mm Bolt has an inside diameter of 0.300″ and will fit universal bolt components.
Is there a 9mm Allen key?
In addition to the precision sizes mentioned above, the common metric Allen wrench sizes are 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, & 10 mm.
Is there a 11 mm wrench?
mobarel – 11 mm Stubby Reversible Combination Ratcheting Wrench.
What is equivalent to a 9mm socket?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 9mm | 0.354 | |
| 3/8″ | 0.375 | |
| 10mm | 0.394 | |
| 13/32″ | 0.406 |
What’s a 15 mm in standard?
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 13mm | Little over 1/2 Inch | 0.51181 Inches |
| 14mm | 9/16 Inch | 0.55118 Inches |
| 15mm | Just short of 5/8 Inch | 0.59055 Inches |
| 16mm | 5/8 Inch | 0.62992 Inches |
What size is a 9mm bolt?
Size Chart
| Bolt size | Size | Tolerance |
|---|---|---|
| 9mm | 9.18 | |
| 3/8″ | 9.70 | |
| M6 | 10mm | 10.24 |
| M7 | 11mm | 11.24 |
What is 9mm BCG?
The KVP 9mm BCG is a feature packed solution for your 9mm Blow Back Carbine or Pistol. The KVP 9mm BCG is a feature packed solution for your 9mm Blow Back Carbine or Pistol. Our 9mm BCG is compatible with either Glock or Colt style magazines. The carrier is constructed of US made 8620 steel, with a Nitride QPQ finish.
Are Hex and Allen the same?
Are hex and Allen keys the same thing? Although there’s always some potential for confusion wherever two different terms are used for the same item, in this case it’s pretty straightforward – to all practical intents and purposes, hex keys/wrenches and Allen keys are indeed essentially the same thing.
What size is 32mm in standard?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 32mm | 1-1/4″ | |
| 7/8″ | 34mm | 1-5/16″ |
| 35mm | 1-3/8″ | |
| 1″ | 38 mm | 1-1/2″ |
Why are there only 18mm hex nuts and bolts?
And most wrench sets excluded those sizes, the notable exceptions being from Snap-On Tools, which tends to include every size. Then the American car manufacturers decided to use metric hardware, and for some reason felt compelled to use 15 and 18 mm hex nuts and bolts (why follow the rest of the world ).
Do I need a 23mm or 24mm socket wrench?
With an 8-point socket wrench for general use around the home there is no need to have both an 24 mm and a 23 mm because the bigger one will engage the corners of the nut satisfactorily. For a mechanic who might need to really torque something down tight, both sizes would be recommended.
What size wrench for hex head bolts?
Japanese motorcycles and recreational stuff tends to use the 8, 10, 12, 14 17 and 19mm wrench/socket sizes for hex headed bolts. I believe that European motors use the same sizes except that 8mm bolts have a 13mm head instead of a 12mm head like the Japanese use. I think that the European standard carries over for US stuff.
How many wrenches are in a set of wrenches?
A small set may have six to 10 wrenches, ranging in size from perhaps five-sixteenths to one inch. Standard wrenches are sold in sixteenth-inch increments up to one and a half inches (and in metric sizes, too, of course).