Table of Contents
What size is a GMA fuse?
GMA 5x20mm fuse Eaton’s GMA fast-acting, glass tube 5mm x 20mm ferrule fuses are designed to UL 248-14 for overcurrent protection of electronic circuits.
What do the letters on a fuse mean?
The number and the A (may be mA) is the amp rating of the fuse. The L denotes that it is a low breaking capacity or glass fuse (H is High breaking capacity and is usually a ceramic package). Taking the example above a T2AL250V fuse is a 2 Amp, Time Delay glass fuse rated for 250 Volts.
What is type fuse?
A Class T fuse is a fast acting, current limiting, fuse that is rated to interrupt a minimum of 200,000 amps. The Type T Fuse is offered in 300 volt AC and 600 volt AC versions. Type T Fuse ampere ratings range from1 to 800 amps.
What is a GDC fuse?
GDC – IEC 5mm X 20mm Time-Delay Glass Tube Fuse. Automotive: Used in older-model cars, glass tube fuses today are found primarily in automotive accessory applications. Appliances & Consumer Electronics: Glass and ceramic tube fuses are often used to protect appliances and consumer electronics.
What does MDL fuse stand for?
“AGC” stands for “automotive glass cartridge” “MDL” stands for “method detection limit” It is generally understood that an “AGC” fuse is fast blow whereas a “MDL” fuse is slow blow.
What is the difference between P and D fuses?
Standard non-time delay fuses are for receptacle and lighting circuits. For Canadian requirements, a type “P” fuse is used for non-motor loads and type “D” fuses are used for electric heating and cycling loads circuits. Both fuses have low melting-point temperature elements.
What are the types of automotive fuses?
There are 4 main types of fuses: Micro, Mini (APM, ATM), Standard (APR, ATC, ATO), and Maxi (APX). Each fuse can be color coded with the appropriate amperage rating on top. Micro: Smallest type of blade fuse.
What size is an AGC fuse?
3AG size, type AGC, 0.125 A to 50 A, 1/4 inch diameter (6.3mm) by 1 1⁄4 inch (31.8mm) long. 4AG size, type AGS, 9⁄32 inch (7.1mm) diameter by 1 1⁄4 inch (31.8mm) long. 5AG size, type AGU, 1 A to 60 A, 13⁄32 inch (10.3mm) diameter by 1 1⁄2 inch (38.1mm) long.
How do I know what type of fuse to use?
You’ll usually find the fuse rating on the side of your fuse, which will be given in amps. Fuse rating is the amount of current needed for the fuse to blow or break. When this happens, it stops the electrical power from flowing through the electrical circuit.
What is a GDL fuse?
Also called slow-blow glass fuses, they open to disconnect an electrical circuit when exposed to sustained loads and short circuits. Their small, cylindrical body is see-through for checking whether the fuse wire is intact or has melted.
What is Class G fuse?
Class G Fuse. A UL Class G fuse is a 600/480 volts AC current limiting fuse that is rated to interrupt a minimum of 100,000 amps. Ampere ratings range from ½ amp to 60 amps. The type G fuse meets the NEC requirements for branch circuit protection. The class G fuse comes in four different sizes depending on the amperage rating to create…
GDC fuses are the same physical size as GMA fuses, except that they are “slow blow”, or “time delay”. The GDC fuses are engineered to withstand normal surge current without blowing needlessly. During steady-state operation, they protect to the same value as fast-blow fuses. Choose amperage value in Options.
What is a fuse in electricity?
Fuse (electrical) In electronics and electrical engineering, a fuse is an electrical safety device that operates to provide overcurrent protection of an electrical circuit. Its essential component is a metal wire or strip that melts when too much current flows through it, thereby interrupting the current.
What Fuse is it?
Fuse is a basic element which is used as a safety device at home or in electrical circuit. When the excess current flows through it the metal melts by which the circuit is isolated.