Table of Contents
What frequency do HID cards use?
125kHz
HID cards primarily operate on one of two radio bands: 125kHz (also known as low-frequency) or 13.56MHz (also known as high-frequency). 13.56MHz cards are a more secure option because sophisticated encoding can be included that improves security and privacy.
Are HID cards NFC or RFID?
HID cards, also called prox cards, proximity cards & access control cards, are cards that use RFID embedded technology.
What is Wiegand 26 bit?
In access control 26-bit is the industry standard, open encoding format. The data encoded using 26-bit format consists of 255 possible facility codes and within each there is a total of 65,535 unique card numbers. This is a relatively small number of unique cards, so additional authentication is often used.
Which bit size capacity is available in 125 kHz formats?
HID Proximity cards are 125kHz cards that come in the following six subtypes: HID® Proximity 1351 ProxPass® II Active Tag is a long-range proximity tag for vehicles that can be encoded with HID format and numbering system up to 37-bits in length. It can be used in a six feet read range.
What frequency is MIFARE?
13.56 MHz
An evolution of “smart” cards, MIFARE cards operate at a frequency of 13.56 MHz (high frequency), and offer higher card ID number capacities. These cards are designed to keep sensitive information safe by utilizing encryption keys.
Is MIFARE an NFC or RFID?
MIFARE Cards Encryption keys prevent data from being emitted until the MIFARE card and card reader mutually authenticate each other. It’s also an RFID card because of its frequency of 13.56 KHz.
How do HID proximity cards work?
The proximity card readers use an electromagnetic field to detect nearby cards and transmit data through the reader to the access control panel. If the card is authorized, the control panel sends a signal back to the reader to trigger a door unlock.
Do HID cards use NFC?
There are some HID products (both cards and readers) that do indeed operate on the same frequency and even share protocols with NFC. Some of these other HID products can be used with Android NFC devices.
What frequency is Mifare?
What do the numbers on a HID card mean?
The HID ordering code number for the Standard 26-bit format is H10301. The maximum Facility Code is 255 because if all eight Facility Code bits are set to ones, they equal 255 decimal. • The maximum Card Number is 65,535 because when all sixteen Card Number field bits are ones, it equals decimal 65,535.
What is the frequency range of a hid card?
HID cards can use both 125 kHz or 13.56 MHz depending on the exact technology in use. I.e. HID DuoProx II, HID ISO Prox II, HID Micro Prox, HID ProxKey III, HID Prox, HID Prox II are all 125 kHz technologies HID iCLASS, HID iCLASS SE/SR/SEOS (CSN and Facility Code/PAC), HID iCLASS Elite & SE Elite are all 13.56 MHz technologies.
What is the frequency range of NFC cards?
Nowadays the standard cards in general use 13.56 MHz. NFC is kinda just another RFID technology which happens to use 13.56 MHz too. This only applies to proximity identification, up to 3-4 inches max!
What is a high frequency access card?
The card from this class supports the integration of former low-frequency (125 kHz) and modern high-frequency access cards with Seos technology. The card provides dual identity in a single credential, enabling physical and logical access control solutions. Users can apply the same card at doors and for IT resources.
Can a scanner read 125 kHz RFID?
A scanner tuned to 13.56 Mhz can read the contents of an RFID card that’s designed to use that frequency, but it can’t read cards that use 125 Khz or UHF 860-960 Mhz. However, there are dual-frequency cards that work with both 13.56 Mhz and 125 Khz frequencies.