Table of Contents
How thick is a space shuttle hull?
… for example, as far as I can tell, the space shuttle has a hull thickness of between 12 and 18 inches, depending on the thickness of the TPS ( Thermal Protection System ) at any given location.
How thick are the walls on a spaceship?
They are 1.5 cm of thickness and are covered with an anti-IR layer. The two centrals portholes are thicker (3.2 cm) and made of silica. The one on the top are less thick (1.1 cm) and the one on the rear wall are 0.7 cm thick.
How thick are the walls of a rocket?
Rocket Body Strength Consider a rocket body of length is L= 20 inch, wall thickness t = 0.016 inch, average diameter D = 2.234 inch, giving a radius r = 1.117 inch.
How thick are the windows on the space station?
A typical window for a house on Earth has 2 panes of glass, each about 1/16 inch thick. In contrast, the ISS windows each have 4 panes of glass ranging from 1/2 to 1-1/4 inches thick. An exterior aluminum shutter provides extra protection when the windows are not in use.
How Strong Is spaceship glass?
Tough Windows for Tough Missions This glass has the strength to withstand the extreme cold of outer space — around 3 degrees Kelvin, barely above absolute zero — with major fluctuations depending on exposure to the sun.
How thick is the hull of a Space Shuttle?
… for example, as far as I can tell, the space shuttle has a hull thickness of between 12 and 18 inches, depending on the thickness of the TPS ( Thermal Protection System ) at any given location. We can assume that a spaceship in Star Wars has a hull thickness somewhat similar to that of…
How thick is the hull of a Star Wars ship?
For a real life comparison, the International Space Station has a hull thickness of 4-7cm. Modern Tanks have 5-11cm of Armor. It all depends on what material is used! Star Wars has several fantasy-materials which posess insane qualities, thus very thin starship hulls are possible.
Is it possible to make a very thin starship hull?
Star Wars has several fantasy-materials which posess insane qualities, thus very thin starship hulls are possible. Starship Hulls are usually made from “Duralloy” which is an improvement to Durasteel (which alone has 10 DR, 10HP/cm). There are variations.
What is the thickness of a tank’s hull?
For a real life comparison, the International Space Station has a hull thickness of 4-7cm. Modern Tanks have 5-11cm of Armor. It all depends on what material is used!