Table of Contents
How many inches can jeans be hemmed?
Most jeans have a 1/2 inch rolled hem. But if you like a deeper hem, you can make it up to an inch on a pair of jeans. Men’s jeans usually don’t have anything wider than that, but if you’re feeling fancy, go for it.
How much should I hem my jeans?
Your jeans should be long enough to have a slight/half or full break. It looks much more polished and all around sharper. If you have the perfect pair of jeans, but they’re too long, get them hemmed by a tailor to the proper length. It’s usually no more than a couple of bucks and totally worth it.
How much can pants be hemmed?
The waist of a pair of trousers can be let in or taken out 2-3″. Look inside the seat for extra fabric at the waistband – this, minus half an inch or so, is as far as you can take the pants out. Trousers are easily shortened, but lengthening them requires fabric at the hems.
How deep should pants hem be?
Jeans should be hemmed 1/4 to 1/2 inch from the floor, parallel to the floor. Narrow leg jeans: Hem should be to the top of our shoe heel parallel to the floor. CLICK HERE for more on how to properly hem your pants.
Can you hem jeans and keep the original hem?
Fabric no longer bunches when hem is folded up! Having reduced the leg width along the inner leg, you can proceed with hemming the jeans with the original hem (same as the instructions for the straight leg jean). FOLD, PIN, SEW and CUT same as above. Frayed jeans are all the rage these days!
Can you cut jeans that are too long?
Jeans with a raw hem is very on trend these days, so there’s really no need to take your jeans to a tailor if they’re too long. I mean, you certainly can if you want a traditional hem; but if you like the raw hem look, you can easily cut off your jeans right at home. All you need is a pair of sharp scissors.
How much can you hem pants?
How much should you hem pants?
Ask your tailor for the hem of your pants to cover about ⅔ to ¾ of the laces on your shoes, so that when you wear them there is enough fabric left to neatly cuff while still breaking once.
How can I get my Jeans hemmed?
You can ask them to give you an “original hem” (also called a “European hem”), which involves removing the original hems of the jeans and re-attaching them after the excess fabric is cut from the legs. While this can add cost to your alterations, it will ensure your jean hems look right.
How do you measure jeans for hemming?
Measure and pin the length of the finished jeans legs. TIP: Measure each leg separately as your legs may vary slightly in length (mine do by about 1/4 inch). Trim the hem allowance to 1 1/8 inch and double turn. Stitch down the hem.
How much should you Hem boot cut jeans?
Finding the right hem for boot cut jeans is really dependent on the heel height of your shoe. You’ll want to hem them about 1/4 -1/2 inch off the ground measured from the back of your heel to get that slimming look.
Can You Hem jeans with a flipped leg?
Whereas for jeans that have a flared leg (the leg shape widens towards the hem), keeping the original hem is not possible. If your flared jeans need to be hemmed, you can refer to my other post on How to Hem Pants: the Ultimate Guide! To this day, I have a pile of my family’s clothes on auto-replenish that needs altering in some shape or form.