Table of Contents
How do you maintain an internal gear hub?
Internal gear hubs are easier to maintain than standard derailleur systems. The main thing you need to do is keep the proper tension on your chain and lubricate it periodically. With a derailleur and cassette system you have to regularly clean your rear cogs and derailleur to keep them shifting smoothly.
How long will a Rohloff hub last?
32/17, 30,16 etc) – these ratios equate to a lower gear than almost any conventional drivetrain! Rohloff hubs should get you through a minimum of 100,000km riding before failure; many people have been known to cover far more. The only maintenance that you need to complete is an oil change every 5000km.
Are hub gears any good?
Generally, hub gears have a long-life span and are usually maintenance free. The advantage of a hub gear is that you can shift gears when stationary. Hub gears also aren’t as efficient as derailleur gears. However, the efficiency of hub gears tends not to deteriorate, and may even get better as the hub wears in.
Are internal gear hubs good?
With an internally geared hub you can shift gears while stationary. Unlike a traditional derailleur system, you don’t need to be pedaling to change gears. This can be great for riding in stop and go city traffic and can also make it a lot easier to down shift on a steep uphill.
Can you use an internal gear hub on a single speed bike?
Internal gear hub and single speed bikes usually have horizontal or semi-horizontal dropouts which allow you to slide the rear wheel back to put tension on the chain. With vertical dropouts, the derailleur maintains the chain tension. So, you can use an internal gear hub but you will likely need a chain tensioner.
How often should internal gear hubs be serviced?
Internal Gear Hub Maintenance. Generally, the frequency of maintenance depends on the complexity of the hub. The more gears there are, the more critical maintenance becomes. Internal gear hub maintenance involves replacing the lubricant inside of the hub. There are grease-based and oil-based internal gear hubs.
How long do wheel hub assemblies last?
The hub assemblies will usually have bearings in them that can wear out over time. When the car is ran, the hub assemblies will have to work to ensure that the wheels turn as they should. The wheel hub assemblies on a car are intended to last for about 100,000 miles.
What are the advantages of an internal hub derailleur?
Since the chain on an internal hub is always in a straight line and doesn’t have multiple gear wheels and pulleys to pass over, it also takes less wear and tear. Every time you shift from one cog the next with a traditional derailleur, the chain actually flexes and twists a bit.