Sage-Tips

How do I put my Plantronics Bluetooth in pairing mode?

Press and hold the Call button until you hear “pairing.” While the headset LEDs are flashing blue and red, activate Bluetooth on your phone and set it to search for new devices. Select “PLT V5200 Series.” Once successfully paired, indicator lights will stop and you will hear “pairing successful.”

How do I pair my Plantronics Bluetooth headset to my phone?

Go to Settings menu on the Android phone. Ensure Bluetooth is enabled, and then tap Bluetooth to access the settings. Tap Search or Scan (depending on the phone) so the phone can locate the headset. Once the phone finds the headset, tap PLT_Legend to complete the pairing process.

Why can’t I connect my Plantronics Bluetooth?

If the headset is listed in your cell phone’s list of paired devices, but will not connect to the phone, please try the following: Delete the headset from your cell phone’s list of paired devices. Pair the headset with your phone again. If the issue persists, try pairing the headset to a different cell phone.

How do I put my headset into pairing mode?

Turn on the connecting Bluetooth device and place it within 3 feet (1 meter) of this unit. /POWER button (for the headphones) for more than 7 seconds while the Bluetooth headphones are turned off. When the indicator starts to blink quickly, release the button. The Bluetooth headphones enter Pairing mode.

How do I reset my Plantronics Bluetooth headset?

Reset Plantronics Bluetooth Headset

1. Remove the Plantronics headset from your cell phones paired devices.
2. Power your cell phone off, then power it back on.
3. Pair your Plantronics headset back to your cell phone (follow manual if unsure how)
4. Your Plantronics headset should now be reset.

How do I pair my Plantronics Voyager headset?

Voyager Legend: How to Pair

1. Turn the headset on and then put it on.
2. Activate Bluetooth on your phone and set it to search for a new device.
3. Select “PLT_Legend.” If your phone asks for a passcode, enter four zeros (0000); otherwise, accept the connection.
4. Once successfully paired, you will hear “pairing successful.”

How do I connect my Plantronics Bluetooth headset to my iPhone?

To pair your Plantronics Bluetooth headset with your iPhone:

1. On your iPhone, press Settings > General > Bluetooth.
2. If Bluetooth is turned Off, tap to turn it On.
3. Place your Bluetooth headset into pairing mode.
4. When you see your Plantronics device name, tap it to pair and connect.

Why won’t my Plantronics Bluetooth connect to my iPhone?

You should first make sure Bluetooth is turned on and try connecting your device in the Bluetooth settings. If your iPhone still won’t connect to Bluetooth, you can try deleting other devices from Bluetooth settings, updating your iOS software, resetting your network settings, or restarting your iPhone entirely.

How do you use a wireless headset?

Turn on the console and the headphones. After they are powered up, push and release the connect button on your console. Within 20 seconds, press the connect button on your wireless headphones for two seconds. You should now hear sound from your headphones.

How do I reset my Plantronics Voyager headset?

Hold down the MINUS (-) volume control and the black power button at the same time until the blue light goes out. Step 3 Wait 1 minute for the reset to power down the software and clear firmware. Step 4. Power back up as normal.

How to pair Plantronics PLT?

How do I put Plantronics PLT in pairing mode? Press and hold the Call button until you hear “pairing.” While the headset LEDs are flashing blue and red, activate Bluetooth on your phone and set it to search for new devices. Select “PLT V5200 Series.”

How do I Pair my Bluetooth headset to my phone?

How to pair a Bluetooth headset to a phone. Turn on and connect to a Bluetooth device To turn on and connect Bluetooth hands-free headset (s), car kit (s), or other Bluetooth devices: Touch Apps . Touch Settings. Turn Bluetooth on . To extend battery life, turn Bluetooth off when not in use.

How do you pair a Bluetooth headset?

To pair your wireless headset with a Bluetooth device: Set the slider switch to the Bluetooth icon. Slide the track switch to “Next” and hold, and press and hold the “Volume up” button at the same time, until the link LED indicator blinks rapidly.NOTE: For initial Bluetooth setup, your headset will automatically be in pairing mode.

How to connect Plantronics earpiece?

– Start with your headset powered on. – Press and hold the call control button for 5 or 6 seconds until the light starts flashing red and blue (some models flash red and white). – Release the button and set the headset aside. – Follow the pairing instructions for your cell phone or other Bluetooth device. – If prompted for a passkey, enter 0000 (four zeros). Note: Do not be alarmed if your phone does not prompt you for a passkey, because many phones do