Sage-Tips

What are the 3 types of instruction format?

Computer Organization | Instruction Formats (Zero, One, Two and Three Address Instruction)

• Operation field which specifies the operation to be performed like addition.
• Address field which contain the location of operand, i.e., register or memory location.
• Mode field which specifies how operand is to be founded.

What are the three instruction formats of MIPS processors?

MIPS Instruction Formats There are three types of instruction format. They are Register Type, Immediate Type, and Jump Type.

What does the ADDC R1 3 R3 instruction do?

Similar format is used for SUB, MULT, DIV, MOD. For eg. “ADD R1 R2 R3;” will move the value R2+R3 into R1. “ADD R1 R2 #3;” will move the value R2 + 3 into R1.

What are the different types of instruction code?

There are three types of formats:

• Memory Reference Instruction. It uses 12 bits to specify the address and 1 bit to specify the addressing mode (I).
• Register Reference Instruction. These instructions are recognized by the opcode 111 with a 0 in the left most bit of instruction.
• Input-Output Instruction.

How many types of instruction formats are there?

Here destination address can also contain operand. This has three address field to specify a register or a memory location. Program created are much short in size but number of bits per instruction increase….4.Three Address Instructions –

ADD	R1, A, B	R1 = M[A] + M[B]
MUL	X, R1, R2	M[X] = R1 * R2

How many instructions are there in MIPS?

There are 3 main instruction formats in MIPS.

What are the different types of instruction set of 8051?

They are:

• Data Transfer Instructions.
• Arithmetic Instructions.
• Logical Instructions.
• Boolean or Bit Manipulation Instructions.
• Program Branching Instructions.

What is CLR C in 8051?

Description: CLR clears (sets to 0) all the bit(s) of the indicated register. If the register is a bit (including the carry bit), only the specified bit is affected. Clearing the Accumulator sets the Accumulator’s value to 0….8051 / 8052 Microcontroller. Instruction Set. CLR – Clear Register.

Operation:	CLR
Syntax:	CLR register

What are different parts of an instruction?

Instruction in memory has two parts: opcode and operands. The operands are subjects of the operation, such as data values, registers, or memory addresses. Due to variety of opcodes and operands, instructions may occupy different sizes of bytes in memory.

What is three address instruction explain with an example?

THREE-ADDRESS INSTRUCTIONS ADD R1, A, B R1 ← M [A] + M [B] ADD R2, C, D R2 ← M [C] + M [D] MUL X, R1, R2 M [X] ← R1 * R2 It is assumed that the computer has two processor registers, R1 and R2. The symbol M [A] denotes the operand at memory address symbolized by A.

How many bits are there in a 12 bit instruction set?

Solution: It can be approached as: The instruction consists of opcode and operands. Given the instruction set of size 12, 4 bits are required for opcode (2^4 = 16). As there are total 64 registers, 6 bits are required for identifying a register.

What are the parts of a 8 bit adder?

8 Bit Adder Description of Parts: A full adder is a combinational circuit that forms the arithmetic sum of three input bits. It has two inputs: X and Y, that represent the two significant bits to be added, and a Z input that is a carry-in from the previous significant position.

How many operands are there in an add instruction?

• An ADD instruction requires the specification of three operands: two sources and a destination. • If memory addresses are 32 bits, the instruction takes three 32 -bit addresses in addition to the opcode. Two general methods are used to reduce the size of the specification

What is the data-processing instruction format of the 32-bit instruction set?

Figure 6.16 shows the data-processing instruction format. The 32-bit instruction has six fields: cond, op, funct, Rn, Rd, and Src2. Figure 6.16. Data-processing instruction format