Sage-Tips

How do I program my ATT Uverse remote to control the volume?

STEP 1: Enter Program Mode – Press and hold the oK and menu keys simultaneously for three seconds until the PoWer key flashes red twice to confirm you are in program mode. STEP 2: Press VOLUME UP – Press the Volume uP key.

How do I reset my uverse remote control?

How to reset U-verse TV remote controls

1. Press and hold the AT and the OK key simultaneously.
2. Release both keys and all four mode keys will flash twice to indicate you are in programming mode.
3. Enter programming code 900 by pressing the number keys on the remote control.

How do I pair my AT Remote?

Remote pairing

1. Point the remote at your DIRECTV STREAM device.
2. Press and hold FAST FORWARD and REWIND at the same time for 2-3 seconds. When they pair, you’ll get an onscreen message that your remote is ready to use.

How do I setup my AT Remote?

Here’s how:

1. Open DIRECTV STREAM on your TV device.
2. Choose Settings and then System.
3. Select Remote & Devices, then Program Your Remote.
4. Choose the TV manufacturer or sound bar you want to add.
5. Follow the prompts to finish up.

How do I turn off my uverse remote with my TV?

When you press the POWER button, continue to hold the remote still for about 3 secs. That will give it time to turn off BOTH the TV & the receiver.

Why is my AT Remote not working?

Check the batteries – When you press the AT button located at the top of the remote control, the button should shine brightly. If the button does not shine, change the batteries. Restart your receiver – Hold down the POWER button for 10 seconds then press it again to restart.

How to program Uverse remote to TV?

– Point the remote directly at the device you are trying to control/program. – Press the On Demand key to program your TV or the Interactive key to program your audio device. – While pointing the remote at your TV, press and hold down the Fast Forward key. It may take a few minutes for the device to respond. – Choose one: TV programming: Let go of the Fast Forward key as soon as the TV turns off. Press the Power button to turn the TV back on. – If it does not work properly, repeat this process.

How do you program att Uverse remote?

Using Your Remote Control Memory Turn on the device you want to program. Then, point the remote control at the device. Press and hold the key (TV, AUX, DVD) that you wish to program. At the same time, hold the OK key. Enter “922”. The selected mode key should flash two times. Press and hold the PLAY button.

How to program att Uverse remote?

With your TV on,use your U-verse TV remote and press Menu.

Select Help> Information> Remote Control Setup.

Next,select your remote control from the TV onscreen list. Refer to your specific remote for TV/device setup options.

Select Top Ten Brand Setup,Automatic Code,or Manual Setup. Here’s a brief description of each option: Top Ten Brand Setup – A quick way to program for popular TV

How do I watch Uverse TV online?

Watch U-Verse Online. Go to the U-Verse Online website and click “Sign in” at the top right. You’ll have to log in with your AT U-Verse credentials to verify that you are a paying U-Verse customer.