Table of Contents
Why stripping is done?
Ligation and stripping is also done when pooling of blood occurs secondary to venous incompetence, and patients suffer from symptoms of venous insufficiency. These symptoms include leg swelling, skin changes, pain and, in severe cases, ulceration.
Is stripping the same as distillation?
What is the difference between stripping and distillation? The primary difference is in the method used to separate the feed’s constituents. While distillation uses heat to boil the volatiles into vapor and then condense and remove them, stripping uses the principles of absorption.
What’s the difference between absorption and stripping?
The key difference between absorption and stripping is that absorption is the transfer of atoms, molecules, or ions from one material to another, whereas stripping is the transfer of components from a liquid to a vapor stream.
What does stripping someone mean?
Strip, deprive, dispossess, divest imply more or less forcibly taking something away from someone. To strip is to take something completely (often violently) from a person or thing so as to leave in a destitute or powerless state: to strip a man of all his property; to strip the bark from a tree.
What is stripping in distillation?
Stripping is a physical separation process where one or more components are removed from a liquid stream by a vapor stream. In industrial applications the liquid and vapor streams can have co-current or countercurrent flows. Stripping is usually carried out in either a packed or trayed column.
How a stripper column works?
Air stripping columns are most widely used for the removal of volatile organic compounds (VOCs) from water. By forcing air through contaminated water, the VOCs are evaporated from the water and the air passing through the column absorbs the contaminated vapor.
What is stripping in construction?
Description. The loss of bond between aggregates and asphalt binder that typically begins at the bottom of the HMA layer and progresses upward. When stripping begins at the surface and progresses downward it is usually called raveling.
What is strip medical?
[strip] 1. a thin, narrow, comparatively long piece of material. 2. to press the contents from a canal, such as the urethra or a blood vessel, by running the finger along it. 3. to excise lengths of large veins and incompetent tributaries after subcutaneous dissection.
What is stripping in distillation column?
Stripping is a physical separation process where one or more components are removed from a liquid stream by a vapor stream. Stripping is usually carried out in either a packed or trayed column.
What is striping factor?
2 Murphree Tray Efficiency versus Stripping Factor The stripping factor is defined as the ratio of the slopes of equilibrium and operating lines (1)where m is the slope of the equilibrium line; G, kmol/s, is the gas flow rate; L, kmol/s, is the liquid flow rate. on tray efficiency can practically be neglected.
Whats is a strip?
A strip is a bond coupon that has been removed from the bond so that the two parts can be sold separately, as an interest-paying coupon bond and as a zero-coupon bond. A strip is also referred to as a stripped bond or a z-bond.
What is stripping and enriching section?
In general, the distillation column is separated into 3 sections: rectifying (or enriching) section, stripping (or exhausting) section and feed (or flashing) section. At the stripping section, the down-flowing liquid is stripped of the more volatile component by the rising vapour.