Table of Contents
Why is my DVD player making a humming noise?
The DVD player may need cleaning. If DVD player makes loud noise for certain disc, the disc may be unbalanced which means one side of the disc may be heavier than the other. Some rental or free DVDs have very bad labels on the top, making them unbalanced and causing vibrating noise while playing.
Why is my Blu Ray vibrating?
If during manufacturing the label on the top of the disc is put slightly off center then that tiny amount of extra weight on one side can cause the DVD to vibrate. The vibrations can also be caused by a tiny crack at the center of the disc that causes the disc to be slightly unlevel.
Are Blu Ray Players noisy?
Sagnet said: It’s a constant soft hiss. I believe the noise level is depending on how fast the disc is spinning. The noise is louder when reading UHD discs (which are spun at a faster speed) then when playing regular blu-rays (which spin at a slower speed).
Why does my Samsung DVD player keep restarting?
While no one knows for sure what’s causing these issues, the most likely culprit is an expired security certificate that means the players can’t properly connect to the web. A botched firmware update might also be to blame.
How do I get rid of the buzzing sound on my DVD player?
Unplug the cables one at a time while playing a disc. See which cable may be causing the hum. Since you only used a coax cable with the old player, it could be the TV as well. Try the DVD player on another TV if you can with the R/W/Y cables.
How do you reset a Samsung Blu-Ray player?
How to Reset a Samsung Blu-Ray Player
- Make sure there is no disc in the player.
- Press and hold the Eject button on the device for at least 8 seconds.
- On the screen you will see a message that the device is being reset.
- The player will automatically power off and reset then it will show the initial setup screen.
Is there a reset button on a Samsung Blu-Ray player?
2 With no disc in the player press and hold the Play/Pause button infront of the BD player for about 8 seconds or until “Resetting all settings to default values…” is displayed on your TV screen. The Blu-ray player then powers off and resets.
How do I clean the lens on my Samsung DVD player?
How to clean DVD Player?
- Use only a dry cloth to dust the exterior of the DVD Player.
- NOTE : Never spray any liquids on to the surface of the player.
- Use only dry type DVD Lens Cleaner. Dry-type cleaner restores picture and sound performance impaired by dust and contaminants.
Why did my Samsung Blu-ray player get bricked?
That’s why, our source tells us, Samsung Blu-ray players that have never connected to the internet were not affected by the flawed file. Also, it explains why players that never performed a software update nor used a network service, and were simply connected to the internet, were bricked.
How do Samsung Internet-connected Blu-ray players work?
One thing you have to understand is that these internet-connected Blu-ray players in question are programmed to log their activities and send copies of this information to Samsung. This telemetry is sent to the tech giant’s servers when the player’s firmware is told to check for a software update.
Why is my disc not playing on my Blu-ray player?
Disc will not play in Blu-ray player There are several reasons a disc may not play in the Blu-ray player. A dirty or scratched disc is the most obvious cause, but an incorrect region code or configuration of your home theater system can be the reason as well. Whether you’re having trouble with 4K or 3D, Blu-ray or DVD, there is a fix.
Does Samsung Blu-ray player have a boot loop issue?
06-22-2020 08:18 AM (Last edited 06-30-2020 12:01 PM by SamsungJustin ) in We are aware of the boot loop issue that appeared on certain 2015 Samsung Blu-Ray players and are offering free mail-in repairs to customers who have been impacted.