Table of Contents
- 1 What size is a #10 hex head screw?
- 2 What size is a hex head?
- 3 What size bolt has a 10mm hex head?
- 4 What diameter is a #10 bolt?
- 5 What size are hex head screws?
- 6 Are all screw heads the same size?
- 7 What is a hex flange screw used for?
- 8 What does a hex cap screw look like?
- 9 What types of hex cap screws does valuevalue fastener offer?
What size is a #10 hex head screw?
US Bolt Head/Wrench Size
| Bolt Diameter | Head and Wrench Size | |
|---|---|---|
| Hex Bolt – Lag Bolt – Square Bolt | Heavy Hex Bolt | |
| #10 | 5/16″ | – |
| #12 | 5/16″ | – |
| 1/4″ | 7/16″ or 3/8″ | – |
What size is a hex head?
Hex Bolt Head Size Chart
| Diameter | Head Size |
|---|---|
| 7/16″ | 5/8″ |
| 1/2″ | 3/4″ |
| 9/16″ | 13/16″ |
| 5/8″ | 15/16″ |
What are the different types of heads on screws?
6 Common Types of Screw Drives
- #1) Phillips-Head. Arguably, the most common type of screw drive is Phillips head.
- #2) Flat-Head. Also known as a slot drive, a flat-head screw lives up to its namesake by supporting the use of a flat-head screwdriver.
- #3) Hex.
- #4) Torx.
- #5) Double Hex.
- #6) Robertson.
What size bolt has a 10mm hex head?
The standard 6mm cap screw has a 10mm head.
What diameter is a #10 bolt?
3/16″
US Machine Screw Diameters
| Size | Nominal Thread Diameter | |
|---|---|---|
| Decimal | Nearest Fractional | |
| #6 | 0.138″ | 9/64″ |
| #8 | 0.164″ | 5/32″ |
| #10 | 0.190″ | 3/16″ |
What size is a #10 bolt?
Bolt Thread Sizes
| Size | Nominal (Major) Diameter [in] | Coarse Thread (UNC) |
|---|---|---|
| Threads Per Inch | ||
| #8 | 0.1640 | 32 |
| #10 | 0.1900 | 24 |
| 1/4″ | 0.2500 | 20 |
What size are hex head screws?
– The diameter range of hex head cap screws is from ¼ inch to 3 inches according to standard. For heavy hex cap screws, the range is from 3/8 inch to 6 inches in the standard.
Are all screw heads the same size?
The smallest diameter screw is 0, and the largest commonly available is 24. For bench work, the most useful sizes are 4 through 12. Of those sizes, 6, 8, and 10 are probably used more than any others. Screws have one of three basic types of head: flathead, roundhead, and panhead (Illus.
Is M10 a 10mm bolt?
If the size is M10 x 25, that would mean that the diameter is 10 mm. The 25 indicated a length of 25 mm. A matching nut would be labeled M10, which also doesn’t require a thread pitch since it’s a course thread fastener.
What is a hex flange screw used for?
Flanged Hex Head Screws Made from Grade 8 steel, these screws can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems. They are at least 25\% stronger than medium-strength steel screws. The flange distributes pressure over the surface, eliminating the need for a washer.
What does a hex cap screw look like?
This hex cap style screw is a one-piece hex-washer head screw with a flat bearing surface, spaced threads and a gimlet point. Some manufacturers prefer hex flange bolts over traditional lag screws because they do not require flat washers. The galvanized finish offers increased resistance to corrosion. High temperature environments
What is a Grade 8 flange screw?
Includes Grade 5 and metric Class 8. 8 screws. A flange distributes pressure where the screw meets the surface, so there’s no need for a separate washer. Comparable in strength to Grade 9 screws, these are about 20\% stronger than high-strength steel screws and often used in heavy duty applications, such as stamping and earth-moving equipment.
What types of hex cap screws does valuevalue fastener offer?
Value Fastener also offers numerous other types of hex cap screws for your project needs. Follow the links below to find the ideal flange screw or hex serrated flange bolt for your application, or use the filters at left to narrow your search by size, length, material, and other factors.