Table of Contents
What does E05 mean on a washing machine?
water temperature sensor
If your washer’s not functioning normally and you can see either E05 or five flashes repeating in between pauses on the display panel, your machine is displaying an error code. Error code E05 relates to a problem with the water temperature sensor.
What is P 06 error in IFB washing machine?
Solution: Press Start/Pause button to restart the drain. Switch OFF the appliance. Drain out the water using drain plug and then clean filter….IFB Washing Machine Error Codes.
| Error Message | Solution |
|---|---|
| E 06 | Clean Coin trap |
| r ın5 HOLd | Press start/pause button or select drain program |
| dLAY | Code will be displayed during delay start mode |
How do I reset E05 error?
Hold down the Stop/cancel or Reset button for about 10-15 seconds. If this doesn’t solve the error, the cartridges are empty. E5/E05: The printhead isn’t (correctly) installed or it’s broken. Open the cover of your printer and check whether the printhead is installed correctly.
How do I fix E05 error on treadmill?
replace burned components or replace control board. E05 error code:Current overload protection or Unstable speed. check the components on control board, if they connect normally? If not, re-plug the components or replace the control board.
What is p5 in IFB washing machine?
If Inadequate water supply or Program time extended due to low extended water temperature then P-05 error will come. then washing / spin not happening in the IFB Washing machine. First Make sure the water input tap is totally open or not.
What is E 1/5 on Canon printer?
E, 1, 5. The FINE ink cartridge can’t be recognized. Replace the FINE ink cartridge.
Is your IFB front load washing machine not working?
From ‘washing machine not functioning’ to ‘water not entering the drum’, there are some problems that you might occasionally encounter with your IFB Front Load Washing Machine. There is no reason to worry though. If you don’t wish to hastily call a service technician, here are some quick tips to easily troubleshoot at home.
How to solve the error code Pr5 on my Kenmore washing machine?
If the same message is displayed , turn off the tap where water inlet is connected and restart the machine . just switched odd machine for 2 minutes and then restart, is problem is not solved close the input tap and start again ,, pr5 error is because of water sensor
How do I know if my washing machine is working properly?
Check if the power cord is plugged in properly and the connection isn’t loose. Ensure that the program is selected. The washing machine should now function normally. Machine may be in operation. Door opening may not be possible. Child Lock may be active. Check if a program is active. If yes, pause the program and check door symbol indication.