What are the 7 steps to be followed when setting up the PIC16F877A ADC?

What are the 7 steps to be followed when setting up the PIC16F877A ADC?

In summary, here are the steps to be followed when setting up the PIC16F877A ADC:

  1. Configure the A/D module:
  2. Configure A/D interrupt (if desired):
  3. Wait the required acquisition time.
  4. Start conversion:
  5. Wait for A/D conversion to complete by either:
  6. Read A/D Result register pair (ADRESH:ADRESL), clear bit ADIF if required.

What is ADC in C?

ADC stands for Analog to Digital Converter, and it does exactly what you would expect it to. It samples an external voltage, and then converts that voltage to a binary number compared to the reference voltage range from Vdd to Vss. The precision of the converted sample is related to the number of bits used by the ADC.

READ ALSO:   How do submarines know the depth of a sea?

What is analog in C?

C driver functions are provided for the Analog I/O Wildcard when you include the waim. These functions provide a high level application interface to the full functions of the board. Using them you can select channels, convert voltages using the 16-bit ADC and produce voltages using the 12-bit DAC .

What is full from of ADC?

The Full form of ADC is Analog to Digital Converter, or ADC stands for Analog to Digital Converter, or the full name of given abbreviation is Analog to Digital Converter.

How do I generate PWM with PIC16F877A?

Steps to Configure PWM

  1. Configure the CCP1 module for PWM operation.
  2. Set the PWM period by writing to the PR2 register.
  3. Set the PWM duty cycle by writing to the CCPR1L register and CCP1CON<5:4> bits.
  4. Make the CCP1 pin an output by clearing the TRISC<2> bit.

How do I program PIC16F877A?

MPLABx Setup Steps

  1. Step1: Open the MPLABx software and select the New project from File Menu as shown below.
  2. Step2: Select the Standalone option for the project.
  3. Step3: Choose the Controller(PIC16f877A) from the device drop down.
  4. Step4: Select the required programmer.
READ ALSO:   Why did the Quakers leave England?

How does an analog to digital converter works?

ADCs follow a sequence when converting analog signals to digital. They first sample the signal, then quantify it to determine the resolution of the signal, and finally set binary values and send it to the system to read the digital signal. Two important aspects of the ADC are its sampling rate and resolution.

How do I program a microcontroller?

Microcontrollers are typically programmed in higher-level languages such as C++ or Java. One of the essential tools needed to program a microcontroller is an integrated development environment (IDE). This software is usually developed by the creators of the microcontroller, and contains useful tools to help you program 3 your microcontroller.

How to program AT89C51?

For AT89C51 programming we used a Keil µVision software. Programming can be C, C++ or in any another language. First of all download the Keil µVision 5 setup and install the following instructions. After the installation now open the Keil µVision, and follow these steps;

READ ALSO:   Which SDLC methodology is best?

What programming language is used to program microcontrollers?

Microcontrollers are typically programmed in higher-level languages such as C++ or Java. One of the essential tools needed to program a microcontroller is an integrated development environment (IDE). This software is usually developed by the creators of the microcontroller, and contains useful tools to help you program 3

How to configure option value of microcontroller in microcontroller project?

To configure option valueof our microcontroller project. Select the Target 1, click on Project>>Option for target ‘target 1’”. Select Target tab to configure microcontroller. Change the crystal value from 24 MHz to 12 MHz and go to output tab. In Output tab, check the “create HEX file” option and then click OK.

By: AdminPosted on