Should default gateway and IPv4 address be the same?
A Default Gateway is always a router that can connect to more than one IP network and can route traffic between those IP networks. So for the computer to be able to communicate via a router, at least one of the router’s IP addresses must belong to the same IP network as the computer.
Is IPv4 or default gateway my IP address?
The numbers indicated on the IPv4 Default Gateway section is your router’s IP Address. If you want to access the router’s web-based setup page, enter the default gateway number in the URL or Address bar of your web browser.
What is default gateway in IPv4?
A default gateway is the node in a computer network using the Internet protocol suite that serves as the forwarding host (router) to other networks when no other route specification matches the destination IP address of a packet.
What is a default gateway address?
What is a default gateway address? Your default gateway address will usually be your router’s IP address. You can find your default gateway address through a computer or on your phone. Whether you’re using MacOs, Windows, iOS, or Android, here’s everything you need to know.
What should the default gateway be?
The gateway can really be any unique address within the subnet itself, but most network administrators designate the first number of the subnet as the gateway. Therefore, 192.168. 99.1 would be the default gateway of our source device given the fact that we have a 255.255. 255.0 subnet mask.
Why is a default gateway needed?
Connection to the internet requires a default gateway since the IP packet needs some hop to help it talk to the destinations outside its network (broadcast) domain. For this the IP packet from your needs to go to a gateway which can communicate to the networks outside its local domain.
What should I set as my default gateway?
You can use a router or firewall as the default gateway. If you do not have Active Directory or any servers, then use the local router or firewall for DHCP. DNS can either be the router or firewall, or explicitly OpenDNS/Quad9/etc. DHCP ( Dynamic Host Configuration Protocol ) has nothing to do with routing.
Why do you need a gateway address?
The gateway is used when transmitting packets. When packets are sent over a network, the destination IP address is examined. If the destination IP is outside of the network, then the packet goes to the gateway for transmission outside of the network. The gateway is on the same network as end devices.