Sage-Tips

How many watts do I need for a bedroom light?

Multiply the width by the length for each room or room segment, if applicable. Multiply the result by 1.5 to determine the estimated watts to sufficiently light a room. For example, for a room 10 feet wide by 12 feet long, multiply 10 times 12 to get 120, then multiply by 1.5 to get 180 watts.

Is 60 watts enough to light a room?

For a room with decent natural light, that should be around 60 watts. For a room with few/no windows, balance the 60 watt desk light with ambient overhead lights or bump that number up to 75 watts. So two 40 watt bulbs in a pair of sconces or three 30 watt bulbs above the mirror for example).

How many lights should be in a bedroom?

This will depend on the individual room and what it’s used for. As a handy rule of thumb, a sitting room or bedroom will generally require around 10-20 lumens per square foot, while a bathroom or kitchen will need a stronger level of lighting, at around 70-80 lumens per square foot.

Which is better 40W or 60W?

So if a package for a lightbulb says the bulb uses 60 watts, or 60W, it means that that bulb will use 60 watts of electrical power. A standard 40W bulb is equal to 400+ lumens, which represents the brightness of a bulb. Typically, the higher the wattage, the higher the lumens, and the more light output.

How many watts do I need for a room?

And as a general rule, there is a formula to calculate the amount of wattage a room needs: Room Length x Room Width x 1.5 = Amount of wattage needed to light a room. However, wattage may need to be lower in a bedroom to provide optimal sleep.

Which light is best for bedroom?

For a bedroom, I’d recommend a “soft white” bulb, with a color temperature of 2,700 to 3,000 Kelvin. A soft white bulb will offer a good enough amount of light to see by, but a warmth that’s gentle on the eyes and less likely to disrupt your sleep.

How can I brighten up my bedroom?

How to Brighten a Dark Room in 10 Creative Ways

1. Place mirrors near light sources.
2. Fairy lights, candles, and other ambient light sources.
3. Pick lighter color or transparent furniture.
4. Cover floors with large, bright area rug.
5. Embrace white walls.
6. Deep clean your windows.
7. Opt for light beige/gray curtains.

How many lumens should a bedroom have?

As a handy rule of thumb, a sitting room or bedroom will generally require around 10-20 lumens per square foot, while a bathroom or kitchen will need a stronger level of lighting, at around 70-80 lumens per square foot. To work out the lumens you need, simply multiply the square footage of the room by this figure.

How do you calculate lighting for a room?

Multiply width of room x length of room x 1.5 = amount of total minimum wattage needed (assuming an eight foot ceiling). Divide by 60 to get the number of 60-watt equivalent bulbs required. Then, add up the wattage in each bulb in each fixture to figure out how many light fixtures are needed.

What is the maximum wattage for a light fixture?

Generally speaking, the maximum wattage ratings are printed on the light-bulb sockets of the light fixture or lamp. You will see language that reads something like: “Caution: Use only Type A lamp, maximum 60 watts.”

Should bedroom walls be dark or light?

Use a Dark Color if Your Bedroom Doesn’t Get Much Light or is Small. Dark colors look dramatic and rich in small bedrooms. Many people think dark colors make a room look smaller, but they don’t. Dark colors tend to disguise the lines of a room so it can actually make it look bigger.

How many watts of light do I need for my Room?

Using this same formula, an L-shaped room with a 10-feet-wide by 8-feet-long section and a 10-feet-wide by 4-feet-long needs 120 watts in the first section and 60 watts in the other, for a total of 180 watts of light. Adjust the wattage levels upward for rooms as preferred.

How do you calculate the number of watts needed to light?

The purpose of the room guides lighting placement. Multiply the width by the length for each room or room segment, if applicable. Multiply the result by 1.5 to determine the estimated watts to sufficiently light a room.

How many lumens should a light bulb be for a bedroom?

Optimal Bedroom Light Bulb Lumens In terms of brightness, 800 lumens is a good starting point for the brightness of the lights in your bedroom. Just make sure that you have enough light for the other activities that you do in your bedroom besides sleeping.

How much lighting do I need for a 10×12 room?

Disperse lighting wattage around the room to achieve both task lighting and ambient lighting as appropriate. A 10-by-12-foot room, for example, lit for average lighting — using the 1.5 multiplier — may divide the required 180 watts among a reading lamp of 60 watts and three track lights of 40 watts for ambient lighting.