Table of Contents
How long does it take to fill a water tank?
>> Two pipes A and B can fill Two pipes A and B can fill a water tank in 20 minutes and 24 minutes, respectively, and the third pipe C can empty at the rate of 3 gallons per minute. If A, B and C opened together, fill the tank in 15 minutes the capacity (in gallons) of the tank is
How many pipes does it take to fill a tank?
Three pipes A, B and C can fill a tank from empty to full in 30 30 minutes, 20 20 minutes, and 10 10 minutes respectively. When the tank is empty, all the three pipes are opened. A, B and C discharge chemical solutions P,Q and R respectively.
How many pipes does it take to fill a cistern?
Two pipes A and B can fill a cistern in 20 minutes and 30 minutes respectively. These pipes are opened alternately for 1 minute each, beginning with pipe A. In what time will the cistern be full?
How long does it take to fill the tank in 6017?
If all the three pipes are opened together, then the tank will be filled in: Pipes A and B can fill the tank in 5 5 and 6 6 hours respectively whereas Pipe C can empty the tank in 12 12 hours. Therefore, i.e., the tank can be filled in 60 17 =3 9 17 60 17 = 3 9 17 hours.
The time it takes for your electric water heater to fill depends on the size of the tank. A 40-gallon tank may take between 30 to 40 minutes to fill up whereas an 80-gallon take may take between 60 to 70 minutes.
How long does it take to fill a 5000 Litre water tank?
It will take about 11 hours to fill the tank under ideal conditions.
How long does it take to fill a pool calculator?
Assuming your water pressure is pumping at 8 gallons per minute (480 gallons per hour) through your outside water hose, it would take 31.25 hours to fill a 15,000 gallon swimming pool.
How much water does it take to fill a 5 litre bucket?
Open the tap full blast, place the container underneath the flow and time the amount of time it takes, in seconds, to fill the container. Example: 5 litre bucket takes 15 seconds to fill 5 litres — 15 seconds = 5 / 15 * 60 = 20 litres per minute average flow rate
How do you calculate the water flow from a tap?
Calculating the water flow from a tap is a fairly simple process and requires a container and timer. Open the tap full blast, place the container underneath the flow and time the amount of time it takes, in seconds, to fill the container. Alternately you can take a certain amount of time and then measure the amount of water in the container.
How do you calculate the volume of a rectangular tank?
If l, b and h are the length, breadth and height of the rectangular tank then, Volume of the tank = l x b x h = 1 x 0.75 x 0.64 = 0.48 m3 Rate of flow of water into the tan = 2.5 litres per sec ⇒ Volume of water flow in 1 sec = 2.5 litres = 2.5 x 0.001 m3 = 0.0025 m3
How many litres of water enter under container size in 10 seconds?
If in 10 seconds you have 3.4 litres of water enter 3.4 under container size and 10 seconds in the time it takes to fill the container. To get a more accurate result all other water sources in the house should be turned off.