Table of Contents
How do I unlock my w204 steering wheel?
Follow these steps below:
- Turn off your car and take the keys out of the ignition.
- Turn the steering wheel one way or the other until you hear a click.
- Your steering wheel will lock until you return, unlock the steering wheel, and start your car.
How do you unlock the steering wheel on a Mercedes c300?
All you need to do is turn the wheel all the way in either direction before you turn off your car. And don’t worry: If you’ve locked your steering wheel on purpose, unlocking it again is as simple as turning on your vehicle and turning the wheel a bit; it will unlock with ease.
How do you bypass the steering lock?
How to Unlock Steering Wheel Without Key?
- Try inserting the key.
- Try using another key.
- If all else fails, try spraying WD40.
- Remove the column panels.
- Free the lock cylinder.
- Install the new ignition-lock system.
- Reinstall the columns.
- Put an electrical cleaner into the keyhole.
How do I unlock my Mercedes steering lock?
Gently turn the steering wheel in whichever direction offers the most room for movement. Hold it in place while you insert the key into the ignition. Gently turn the key while you continue to hold the steering wheel in the right direction. This action should unlock your steering wheel and start the car.
What would cause a Mercedes not to start?
Systems to Check to Troubleshoot a Mercedes-Benz Starting Issue. Other issues preventing start can include ECM / PCM computer failure electrical problems, or issues with the camshaft position sensor, shifter selector module, or the driver authorization or immobilizer device.
How do you unlock a Mercedes steering wheel?
Does your Mercedes have an electronic steering lock?
The electronic steering lock that Mercedes has installed in a wide variety of their vehicles has become a very well-known sore spot for owners. This simple theft prevention device fails and fails often, and when it does it can leave you with a stranded vehicle and a huge repair bill.
Should I replace my ignition or steering lock?
If your ignition or steering lock are starting to go bad you should replace them right away, before they leave you stranded and while replacing them is still easy. While the dealership can charge thousands of dollars for replacing this unit you can do the work yourself and save some serious money.
How do I remove the steering shaft?
You can remove the unit out the opening between the column and dash. Installation is the reverse of removal. When remounting the steering shaft make sure to seat the forward bolts first (red arrows, bolts not shown) and then the rears. Once the bolts are in place you can torque them to spec.
How do I remove the Grub lock on the steering column?
You need to remove the 13mm nut that holds this grub bolt in place (red arrow). You will need to do this blind or by feel but it is the only nut back there. With the nut off you will press the grub bolt into the lock assembly (red arrow), and then lift the locking assembly up and out from the steering column.