Sage-Tips

How do I play Sound through USB headphones and speakers?

Playing Sound on Headphones And Speakers Using Software Settings

1. Right-click on the speaker icon in the notification tray, then select Sounds.
2. Select the recording tab.
3. Look for Stereo Mix, right-click on it and select Enable if it isn’t already.
4. Right-click on Stereo Mix again and select properties.
5. Select the Listen tab.

Why can’t I hear anything when I plug my headset into my PC?

If you’re using wired headphones, check your audio jack. Look for the audio output port on the side or back of your computer, often with the headphones or speaker icon, and ensure your headphone jack is properly plugged in. If so, turn it off, plug in your headphones and see if they work again.

How can I hear Sound through my headset on PC?

You can do this by firing up some media on the PC or utilize the test function in Windows.

1. Right-click the sound icon in the taskbar.
2. Select Open sound settings.
3. Choose Sound control panel on the right.
4. Select the headphones (should have a green tick).
5. Hit Properties.
6. Select the Advanced tab.
7. Hit the test button.

How do I connect headphones to my PC with audio jack and USB?

USB headset If your headset features a USB connector, find an unused USB port on your computer. Plug the headset USB connector into the USB port. Your computer should recognize and configure the headset for use and may display a notification message in the lower-right corner when ready.

How do I connect my wired headphones to my computer?

1. Connect your headset to your PC’s USB 3.0 port. Identify the USB 3.0 port on your computer and plug in the USB cable.
2. Connect your headset to your PC’s HDMI out port. Identify the HDMI out port on your computer and plug in the headset’s HDMI cable.
3. Connect headphones to your headset.
4. Common issues.
5. See also.

How do I use a USB headset on my PC?

Plug the headset directly into the PC and not into a hub or docking station. If you are using a desktop, plug your headset into a rear USB port if applicable. Make sure the headset is selected as the default device in the PC under both the Sound Recorder and Playback options.