Table of Contents
What is the four ways approval for replacement parts may be obtained?
It may be approved by the original manufacturer; it may be approved under a Parts Manufacturers Approval (PMA) by an after-market manufacturer; it may be approved as part of an Supplemental Type Certificate (STC) by an after-market manufacturer; it may be approved by meeting the requirements of a Technical Standard …
What requirements must a part meet to be considered approved according to the FAA?
NOTE 1: Parts, which have been maintained, rebuilt, altered, or overhauled, and approved for return to service in accordance with parts 43 and/or 145, are considered to be “approved parts.” Parts that have been inspected and/or tested by persons authorized to determine conformity to FAA-approved design data may also be …
The Type Inspection Authorization (TIA) is prepared by the ACO on FAA Form 8110-1 and is used to authorize. official conformity, airworthiness inspections, and flight tests necessary to fulfill certain requirements for Type.
Does a PMA part require an STC?
Parts produced under an FAA PMA are approved parts. A supplemental type certificate (“STC”) is a design approval only. Thus, an STC holder who wants to produce articles for use on aircraft will need some other production basis (in addition to the STC).
What is FAA production approval holder?
Production Approval Holder means an entity holding a production certificate issued under the authority of the FAA. Production Approval Holder means an entity holding a production certificate issued under the authority of the FAA or (if applicable) EASA.
How do I get FAA PMA approval?
4 Paths to Gaining FAA PMA Authorization
- Supplemental Type Certificate (STC) Typically, approval of major changes in type design of an aircraft is obtained in the form of an STC.
- Licensing Agreement.
- Identicality.
- Test and Computation.
What is an aviation STC?
A supplemental type certificate ( STC ) is a type certificate ( TC ) issued when an applicant has received FAA approval to modify an aeronautical product from its original design.
How do I get FAA inspection authorization?
You will need to present a filled out FAA Form 8610-1, Mechanic’s Application for Inspection Authorization and provide proof of identification. During the meeting, the ASI will interview you in order to verify that you meet the requirements for the authorization.
Do PMA parts need a 337?
(1) Execute FAA Form 337 A PMA’d engine heater is a minor alteration requiring just a logbook entry by the mechanic – no 337 is needed.
What does FDA premarket approval mean?
Premarket approval (PMA) is the FDA process of scientific and regulatory review to evaluate the safety and effectiveness of Class III medical devices. The applicant must receive FDA approval of its PMA application prior to marketing the device.
What is the difference between OEM and PMA?
PMA stands for Parts Manufacturer Approval. PMA parts get production and design approval issued by the FAA. The FAA approves of PMA parts if they are manufactured following with FAA accepted procedure, they need to meet the FAA standards of airworthiness. OEM is the Original Equipment Manufacturer.