What is Hponcfg?

What is Hponcfg?

HPONCFG is an online configuration tool used to set up and reconfigure iLO without requiring a reboot of the server operating system. The utility runs in a command-line mode and must be executed from an operating system command line on the local server.

How do I find my iLO IP address in Linux?

ILO: Get the ILO IP from a Linux host server

  1. STEP 1 : Install ipmi tools # dnf install ipmitools.
  2. STEP 2: Load the ipmi kernel module # modprobe ipmi_devintf.

Which command is used to invoke configuration utility in Linux?

ifconfig in short “interface configuration” utility for system/network administration in Unix/Linux operating systems to configure, manage and query network interface parameters via command-line interface or in a system configuration scripts.

READ ALSO:   Is it generally advised that every living room in the house should get direct sunlight at least for a short time?

How do I use HP Lights Out of configuration utility?

Tutorial – HP Lights-Out Configuration Utility on Windows

  1. Download the HP Lights-Out Configuration Utility for Windows.
  2. Start the HP Lights-Out Configuration Utility installation.
  3. Accept the license and click on the Next button.
  4. Click on the next button.
  5. Wait the installation to complete and click on the Close button.

How do I change my IP address from ESXi to ILO?

Configuring IP address for HP ILO from ESXi host

How do I reset my Hponcfg ILO password?

Press ESC and then :wq to save the file and leave the VI. Now use HPONCFG together with the XML file to reset the password. That’s it! You can now login with “Administrator” and “password”.

How do I access ILO command line?

Access to HP ILO remote console via SSH

  1. Open a ssh connection to the ILO’s IP address. # ssh ilo_admin@ip_address.
  2. Enter your ILO admin account and password. After that you will see the ILO prompt.
  3. To access the remote console of the server at the ILO prompt type “TEXTCONS”
  4. You will be presented with the Login: console.
READ ALSO:   Can BRA turn Super Saiyan?

How do I find my ILO configuration?

To access the UEFI System Utilities, press F9 during POST, and then select SystemConfiguration→iLO 4 Configuration Utility.

How do I use ipconfig in Linux?

The basic syntax of the ifconfig command is shown below:

  1. ifconfig [-a] [-v] [-s] [[] ]
  2. ifconfig [interface-name] [ip-address] netmask [subnet-mask]
  3. ifconfig [interface-name] mtu [mtu-value]

How do I access ilo2?

Enabling the iLO 2 shared network port feature through the web interface

  1. Connect iLO 2 NIC port 1 to a LAN.
  2. Open a browser, and browse to the iLO 2 IP address or DNS name.
  3. Select Administration, Network Settings.
  4. On the Network Settings page, select Shared Network Port.
  5. Click Apply at the bottom of the page.

How do I find my iLO address?

you can go into System Management Homepage-> Management processor link, then when you click it on the left from the task pane you must be forwarded to a link for iLO and you can see the IP address.

By: AdminPosted on