Table of Contents
How can I reduce my turntable speed?
Some turntables with have speed adjustment screws – check your owners manual to find out where. Usually, turning these screws clockwise with speed up the platter and anti-clockwise will slow it down. Once you’ve amended the screws, test again with a strobe disc or phone app until you get the speed you desire.
Why do some records play faster?
Speed Selector Switch Problem This is often caused by dirt or grime inside the switch that can build up over time. To determine if it is the switch try gently moving it slightly while the platter is spinning. If you hear the record slow down or speed up slightly, there is a good chance the switch could be the issue.
Why do records sound sped up?
Why Does Vinyl Sound Higher Pitch? Like in any other sound source, the sound produced by your vinyl record results from air vibrating. So, if your record player produces sound at a faster rate than the record is recorded initially, the vibrations will hit the listeners’ ears faster than the original rate as well.
How can I make my turntable spin faster?
Block it up on wood or between two tables so that you’re able to get in underneath. Generally, the adjustment screws are set up so that a clockwise turn speeds up the platter, and a counterclockwise turn will slow it down. Always adjust the 33 1/3 rpm speed first.
How do I make my record player spin slower?
Generally, the adjustment screws are set up so that a clockwise turn speeds up the platter, and a counterclockwise turn will slow it down.
Why does my vinyl speed up and slow down?
Oftentimes, a loose belt is the main cause of a slow record player. This occurs because without the grip of the belt on the pulley, the turntable can move too slow, affecting the overall sound and quality of the playback.
Why is my record player speed too fast or too slow?
If your record player speed is too fast or too slow, one of these issues is likely the cause: 1 Turntable belt elasticity or tension. 2 Cleanliness of turntable motor. 3 Lubrication of turntable parts. 4 Turntable rotation speed calibration. 5 Speed selector on turntable. 6 Center hole of record.
Why does my turntable play at the wrong speed?
As a turntable is made up of moving parts, any friction will cause a slowing down of the mechanical process, so any excessive friction can adversely affect the playing speed. Sometimes the explanation is staring us right in the face, and the wrong speed for the record is selected.
Why won’t my turntable run a 33 rpm record?
Is it possible that you have it set at 45 for a 33 rpm record. The other possible issues is that the frequency of mains power may be different to that designed for the motor. In the US the mains power frequency is 60 Hz whereas it is 50 Hz in much of the rest of the world. If you run a 50 Hz turntable in 60 Hz power it will run 20\% too fast.
How do I adjust the speed on my record player?
The belt should have shrunk slightly, so put it back on your record player and test the speed again. Some turntables with have speed adjustment screws – check your owners manual to find out where. Usually, turning these screws clockwise with speed up the platter and anti-clockwise will slow it down.