Sage-Tips

Can you use wooden dowels for curtain rods?

By styling wooden dowels to look like copper rods, the DIY curtain rods were so inexpensive (just $12 apiece!) that we had money left over to craft statement-making tiebacks to match. Measure your window, then cut the 1-inch wooden dowel to a length at least 5 inches longer than your window is wide.

What can I use instead of curtain rings?

Unique Ways to Hang Your Curtains

• Make Your Curtain Hardware. These ideas are just a start.
• Coat Hooks. Brass or metal coat hooks can be attached above your window to hold curtain panels.
• Glass or Brass Door Knobs.
• Spoons.
• Belts.
• Clothespins.
• Wire.

How do you make a curtain rod out of a wooden dowel?

Find and mark the center of one end of the dowel. Drill a 3/16 inch hole one inch deep at the center mark. Use pliers to screw one end of the dowel screw into the dowel, then screw the other dowel onto that. Sand and apply clear finish* to dowel rods.

Can I hang curtains without putting holes in the wall?

For anyone who lives in a space that may frown upon making holes in the walls, or for anyone who may not want to take on such a task, there’s a simple alternative to hanging curtains or drapes. And the answer is brilliantly simple. Look no further than 3M Command hooks.

Can you hang curtains without a rod?

You’re missing a great decorative opportunity if you’re not wondering how to hang curtains with or without a rod. To hang curtains where there weren’t any before, you can put up a rod, but if you don’t want to fix one of these to the wall or prefer a different look, they can be hung without a rod as well.

How much weight can a 1 inch dowel rod hold?

Your 1″ dowel would be approximately 1/3 the strength of the 1.5″ dowels. Their weakest dowel had a safe load of 3,200# with an ultimate failure load of 5,000 – 6,000#. Therefore your safe load will probably be more than 1,000# and almost twice that before it would actually fail.

How do you attach a wooden dowel to a curtain rod?

How can I hang curtains without curtain rods?

5 Creative Ways to Hang Curtains Without Rods

1. upholstery tacks.
2. tension cables.
3. hook-eye screws and drapery pins.
4. staples and furring strips.
5. cabinet knobs.

How do you hang curtains without putting holes in the wall?

5 Easy Ways to Hang Curtains Without Drilling

1. Use 3M Command Hooks.
2. Try Kwik-Hang Curtain Rod Brackets.
3. Use Tension Rods.
4. Get Creative With Coat Hooks.
5. Try Magnetic Rods on Metal Doors.

Are these 20 beautiful DIY curtain rods easy to make?

These 20 beautiful DIY curtain rods are easy and inexpensive to make, even if you don’t have a lot of DIY experience. Curtain rods are one of my favorite things to DIY.

How do you hang curtain rod brackets on the wall?

To hang the brackets, use painter’s tape to mark the top of the bracket and where each screw hole should be. Easily mark the wall for the screws by using a piece of painters tape. Then transfer that tape to the wall. I knew I wanted my DIY Wooden Curtain Rod brackets 4″ below the crown.

How many curtain rod brackets do I need for a window?

Curtain Rod Brackets – I used 3 per window since my windows were really wide. If you have narrower windows, you could probably get away with 2 braces per window. Table Legs – These will be used as the finial/decorative piece on the end of the rod. Therefore, you’ll need two per curtain rod.

Can You Make your own driftwood curtain rods?

Make gorgeous, real wood, DIY curtain rods that look like something from a high end store for a fraction of the cost! Save money and still provide a modern, unique style by making West Elm style inspired wood curtain rods. Add a coastal vibe to your home with this unique and inexpensive DIY driftwood curtain rod.