Table of Contents
What does p11 mean in IFB washing machine?
Its not a problem, while the Machine was working some one turn the programme selector knob. Machine will finish the prograqmme without any trouble. In case of issue ,persist switch off the machine from the main switch , turn the programme knob to off position & then restart after 20 Seconds. 6.2K views.
How do you troubleshoot a washing machine problem?
Washer Troubleshooting Guide
- Check that the washer is plugged in securely.
- Check the circuit breaker or fuse box.
- Test the outlet for current.
- Check that the water supply valves are turned on.
- Inspect the filter screens.
- Test for overheating.
- Test the water level switch.
- Test the timer control.
How to fix P-05 error in IFB washing machine?
If Inadequate water supply or Program time extended due to low extended water temperature then P-05 error will come. then washing / spin not happening in the IFB Washing machine. First Make sure the water input tap is totally open or not. Switch off the Appliance and wait for 1 minute. After switch ON the washing machine. Select the start program.
Why is my washing machine making a P12 error?
This error appears normally at the time of extraction ( spin) when machine tries to balance the load inside the drum to reach its maximum set rpm .Just check if there is any unbalance switch in the machine which got activated. Issue could be with frequency drive if the motor is drive operated. What is the P12 problem in an IFB washing machine?
Is your IFB front load washing machine not working?
From ‘washing machine not functioning’ to ‘water not entering the drum’, there are some problems that you might occasionally encounter with your IFB Front Load Washing Machine. There is no reason to worry though. If you don’t wish to hastily call a service technician, here are some quick tips to easily troubleshoot at home.
What does the code unbl mean in my washing machine?
The code UNBL in your washing machine stands for Unbalance means the load inside the drum is not balanced. This error appears normally at the time of extraction ( spin) when machine tries to balance the load inside the drum to reach its maximum set rpm .Just check if there is any unbalance switch in the machine which got activated.