Sage-Tips

How do I reset my phone after water damage?

Place your phone inside the rice, shut the ziplock bag/container tight and keep it in a dry place. You can also try using oatmeal or silica gel packs. Leave the phone in the rice for at least 24 to 48 hours. Ideally, do not even try to take the phone out to check if it has started working or not.

Can a water damaged phone Be Fixed?

Whatever the case may be, you now have a soaked cell phone. Although most cell phones nowadays do have some degree of waterproofing, water can still do some real damage to your phone. The good news is yes, wet cell phone repair is possible. And yes, iDropped can fix any water damage that happened to your phone.

How do I factory reset my HTC 10?

Resetting HTC 10 (Hard reset)

1. From the Home screen, swipe up and then tap Settings > Backup & reset.
2. Tap Factory data reset. To avoid deleting media and other data from your storage card, make sure you do not select the Erase SD card option.
3. Tap Reset Phone.
4. Tap Erase Everything.

Is water damage permanent?

The water in the phone may cause permanent damage to various electrical components. A much more common problem is corrosion. This damage isn’t immediately visible. And once the corrosion has hit a certain level, it starts to short out connections on the phone’s motherboard.

Can you fix a water damaged phone with non removable battery?

If you phone has a non-removable battery, switch off the phone immediately and open all the ports it has and drain out any water would have entered. Keeping the phone on during this time could permanently damage the internal circuitry due to a short-circuit.

Will a wet phone work again?

In a small number of cases swamped phones are able to dry out on their own over the course of days or weeks. But it’s not common. And while some newer phones are water resistant and can withstand a quick drop in a bucket or toilet, none are water proof.

How do you fix a phone that fell in water without rice?

The Trick To Fixing A Wet Phone That’s Even Better Than Rice

1. Remove your phone from the water source and turn it off right away. Adobe.
2. Try to remove as much water as possible by shaking, blowing or dry-vacuuming the water out. Adobe.
3. Surround it with silica gel.
4. Wait 2-3 days before turning your phone back on.

How do I restore my HTC to factory settings?

Press and hold the Volume down key, and then press and hold the Power/Lock key. Wait for the screen with the Android images to appear, and then release the Power/Lock and Volume Down keys. Press the Volume Down key, until “Factory reset” is highlighted.

How do you get water out of your phone without rice?

How do I Hard Reset my HTC 10?

How to factory reset the HTC 10 (hard reset) From your device’s home screen, open the app drawer. Open the Settings app. Select Backup & reset. Tap Factory data reset If you’d also like to delete any multimedia files that are stored on your microSD card, select Erase SD card. Tap Reset phone. Enter your PIN or Password. Tap OK.

What do I do if my HTC 10 is not responding?

If your HTC 10 isn’t responding at all when you press the power button, try this method: Press and hold the power and volume down buttons at the same time for at least 12 seconds If your device is having bigger problems that you just can’t seem to fix, you may need to perform a factory reset (or hard reset).

How do I restart my HTC 10 in airplane mode?

Turn your display on by pressing the power button. Once your display is on, press and hold the power button. After a few seconds, you’ll see an option to power off, toggle airplane mode, or restart. Tap restart. Your HTC 10 will now restart.

What to do if your HTC 10 has black screen?

If none of the methods have worked in trying to get the HTC 10 to turn on with the black screen, it’s suggested to take the smartphone back to the store or to a shop where it can be physically checked for any damage. If proven defective by a technician, a replacement unit may be provided for you of it could be repaired.