Table of Contents
Can you use RCA for digital coax?
You can use a regular Composite VIDEO cable instead of a digital coax… I had a friend who used a subwoofer cable instead of a digital coax cable and he experienced dropouts every minute or so. So just spend $15 and get a Digital coax cable…
How do I hook up my old stereo to my new TV?
Your simplest option is to pick up a small external box called an HDMI audio extractor, which isn’t hard to find online or at electronics retailers. It splits out the audio portion of an HDMI signal and gives you a set of audio outputs – usually RCA connectors – that you can connect to your stereo.
What is the difference between RCA and digital coaxial?
A Digital Coaxial connection uses a cable that has RCA-type connectors. This digital coaxial cable is different from the standard RCA cable in that it is designed to handle the wider frequency bandwidth of the digital audio bit stream.
How do you wire RCA to coax?
This conversion is possible by using an adapter that is available at electronics stores.
- Unscrew one end of the coaxial cable from the device it is hooked up to.
- Thread the outer ring of the coaxial cable plug onto the threaded RCA adapter, taking care not to bend or break the rigid wire inside the coaxial plug.
How do I use digital audio on my Samsung TV?
Smart TV audio input and output connections
- Select Audio from the menu.
- Select Speaker setting.
- Select Speaker selection.
- Select External speaker.
- Locate the digital audio out port (optical) on the TV.
- Connect the digital audio cable to the digital audio output (optical) on the TV.
How do you connect coax cable to speaker wire?
Coax can work as a speaker cable, but it is not an efficient process to create this result. You’ll need to replace the standard F-connectors with an RCA end to make the setup work. The best option is to run a powered subwoofer with it, although any speakers theoretically work.
How do I connect my TV to my coaxial cable?
Plug the coaxial audio cable into the smart TV’s rear output jack and take the cable from the TV and plug it into an available input jack on the rear of the receiver. Write down the input jack you have used. Set the TV audio through its menu to “audio out.” Use your receiver’s remote to find the coaxial audio selection in the menu and choose it.
How do digital coaxial audio cables work?
Alternatively, digital coaxial audio cables send a digitized digital signal from the smart TV to a receiver. The digital coaxial audio cable is a single cable making it easy to run from the TV into the rear input of the receiver. The barrels of the cable are round.
How do I connect my TV to my sound system?
1 Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the Audio Output jack on your TV. 2 Connect the other end of the cable to the corresponding jacks on the A/V receiver or home theater system. 3 Turn on your TV. 4 If you’re using an Optical Digital Cable, set Speakers to Audio system .
What type of coaxial cable do I need for an AV receiver?
A well-made coaxial cable doesn’t need to be particularly expensive. Something like this will be fine: However, you can make your own choice. Amazon even has their own AmazonBasics range of digital audio coaxial cables which will do the job for most tasks. You can also use this type of cable to connect your AV receiver to a subwoofer.