Sage-Tips

What are the cables connected into the HDD?

Connect the hard drives with SATA SATA uses simple cables that are keyed to fit on the drive and motherboard connector one way. Connect one end of the SATA cable to the drive, and the other end to an available SATA port on your motherboard, and you’re halfway there.

What are two types of cables used to connect hard drive to motherboard?

Find out what type of cable system is used to connect drives to the motherboard. There are two systems in common use: IDE drives (also known as PATA, or Parallel ATA), and SATA (Serial ATA) drives.

Which two connection types are used to support an internally connected HDD?

Most modern internal laptop hard drives use a SATA connection to interface with the computer; however, older drives use the EIDE connection type and external hard drives can use a range of connectors.

What are the two cables needed for SSD?

With an SSD you need to attach the power and data cable. They should use normal current connectors.

Are all hard drive connectors the same?

All hard drives and some SSD have two separate connectors, one to connect with power supply, and the other one connects to data controller on the motherboard for data transferring. Red triangles point two 15-pin SATA power connectors, the next 4-pin Molex connectors are still presented to support older devices.

Is there a difference between SATA 2 and SATA 3 cables?

SATA II vs. SATA III Cables – Is there a Speed Difference? (No!) The results are effectively identical. There is no measurable difference between differently-branded SATA cables as we tested.

What is eSATA cable?

eSATA is a SATA connector accessible from outside the computer, to provide a signal (but not power) connection for external storage devices. Cables are available to both connect and power a SATA device from an eSATAp port (including 12 V power if available).

Do HDD and SSD use the same cables?

Since both drives use the same interface – SATA, then the cables are the same for both power and data. So basically you should have no trouble connecting the SSD you’ve mentioned with the cables that would be connected to the HDD.

What cables do you need to hook up an SSD?

To install the SSD as a secondary drive (not your primary or boot drive), use a SATA cable and attach one end of the cable to the SATA connector on your motherboard. Attach the other end of the SATA cable to your Crucial SSD.

What ports do HDD use?

SATA Ports on the Motherboard Basically, in order to connect hard drives to a PC, you need an interface. SATA is an interface that is used to connect SATA SSDs, HDDs, and CD drives to your motherboard. SATA stands for serial ATA and it it has many different version. The most current version is SATA 3.0.