Table of Contents
How do you convert HP to GPM?
Calculate your Hydraulic (Fluid Power) Horsepower PSI is gauge pressure in pounds per square inch; GPM is oil flow in gallons per minutes. Rules-Of-Thumb: Horsepower for driving a pump: For every 1 HP of drive, the equivalent of 1 GPM @ 1500 PSI can be produced.
How many HP is a GPM?
Tips. The typical efficiency of most hydraulic equipment runs at about 60 percent to 75 percent. One horsepower equals 3,960 gallons/minute/feet.
How many gallons per minute does a 1/2 HP well pump?
1/2 HP Submersible 2-Wire Motor 10 GPM Deep Well Potable Water Pump.
How many gallons per minute does a 3 HP pump?
Number of submersible well pump stages determine pump lift capacity
| Table of Submersible Pump Stages vs HP vs Total Dynamic Head vs. GPM Flow Rate Capacity | ||
|---|---|---|
| Water Pump HP | Nr. of Pump Stages | GPM Flow Rate Capacity |
| 2 HP | 14 | 4 – 42 GPM (varies by TDH) |
| 3 HP | 19 | 4 – 43 GPM (varies by TDH) |
| 5 HP | 28 | 4 – 43 GPM (varies by TDH) |
How many GPM is a 3 4hp well pump?
10 GPM
3/4 HP Submersible 3-Wire Motor 10 GPM Deep Well Potable Water Pump.
How much is a 3/4 horsepower well pump?
Compare with similar items
| This item 3/4 HP Submersible 3-Wire Motor 10 GPM Deep Well Potable Water Pump | Hallmark Industries MA0414X-7A Deep Well Submersible Pump, 1 hp, 230V, 60 Hz, 30 GPM, 207′ Head, Stainless Steel, 4″ #1 Best Seller | |
|---|---|---|
| Price | $29999 | $14500 |
| Sold By | Knupp Co | Amazon.com |
How many gpm does a 2 HP pump?
Number of submersible well pump stages determine pump lift capacity
| Table of Submersible Pump Stages vs HP vs Total Dynamic Head vs. GPM Flow Rate Capacity | ||
|---|---|---|
| Water Pump HP | Nr. of Pump Stages | GPM Flow Rate Capacity |
| 1 1/2 HP | 11 | 4 – 40 GPM (varies by TDH) |
| 2 HP | 14 | 4 – 42 GPM (varies by TDH) |
| 3 HP | 19 | 4 – 43 GPM (varies by TDH) |
How many GPH does a 1.5 HP pump?
Pool Pump Operating Costs
| Pump Size | GPM (varies with plumbing) | Cost/Hour |
|---|---|---|
| 1.0 HP | 60 | $0.06 |
| 1.5 HP | 68 | $0.09 |
| 2.0 HP | 76 | $0.12 |
| 3.0 HP | 85 | $0.18 |
How do I calculate the horsepower required to pump water?
Horsepower can also be calculated as: 20 gallons of water per minute is elevated 20 ft. The horsepower required (ex. friction loss in piping and efficiency = 1.0) can be calculated as Pwhp = (20 gpm) (20 ft) (1) / (3960 (1.0)) Power required to pump water at 60oF with ideal pump efficiency 1.0: Note!
How many gallons per minute does my well pump use?
It is also affected by the capacity of your well. For example, if your well pump can fill a 5 gallon bucket in 60 seconds direct from the well, you can consider you have 5 Gallons Per Minute, or 5 GPM. Most homeowners have a standard single-speed submersible pump with a pressure tank on their private well.
How deep can a 2 line jet pump pump go?
A two-line jet pump can typically raise water from depths of 30-feet to 80-feet, and at water delivery rates of 4 gpm (gallons per minute) (for a 1/2 hp 2-line jet pump serving an 80 foot deep well) to 16 gpm (for a 1 hp 2-line jet pump serving a 30 foot deep well).
What is a good water flow rate for a water pump?
Rated water flow rates for pumps range (by horsepower and model) from a nominal 6 gpm to 35 gpm.