Table of Contents
Can you put WD40 on longboard bearings?
You should never use WD40 to clean skateboard bearings . This is a product designed specifically made for removing rust and grime, not as a lubricant or cleaner for bearings. It works wonders at first, but you’ll find yourself reapplying more and more as it dries out bearings.
Can you spray WD40 on bearings?
Did you know a spray of WD-40 Specialist White Lithium Grease is a great lithium lubricant for bearings? It reduces friction on bearings and helps keep them protected from rust as well. Simply apply by spraying directly onto the area.
What can I use to lubricate skateboard bearings?
It’s important to use a silicone-based lubricant. WD40 or others like it will dry out your bearings and attract dust and dirt. You can pick up a bottle of Bones Speed Cream at the skate shop, or try some Prolong from the auto parts store.
How do you lubricate longboard bearings?
Remove the bearing shields and throw your bearings in isopropyl alcohol for a few hours. After they soak and get all the dirt out, take your bearings out of the solvent and let them air dry for about 30 minutes. Lastly lubricate your bearings with a tiny drop of skate lube and put the shields back on.
Can you use WD-40 to clean skateboard bearings?
Never use WD-40 to clean your skateboard bearings. WD-40 is designed for removing rust and grime, however, it’s not a lubricant. Even though it might seem great at first, WD-40 will dry your bearings out quickly and then you need to keep reapplying it until you’re in need of new bearings.
How do you take care of longboard bearings?
Can you use cooking oil on skateboard bearings?
In a pinch, motor oil or even cooking oil will work. Wd-40 is a solvent, not a lubricant. Solvents will wear away at the plastic pieces inside the bearing that make the bearing work, and will limit the life of your bearings. Olive oil is not good, but is better than nothing, and is probably better than using a solvent.
What oil do you use for bearings?
The two types of oil used for bearing lubrication are petroleum based and synthetic. Synthetic fluids include synthetic hydrocarbons, diesters, polyesters, glycols, fluorinated compounds, silicones and phosphate esters.
Can WD40 be used as a lubricant on a bearing?
Under these conditions, the typical rule of thumb is for a minimum viscosity of 4 centistokes (at operating temperature) to support the load. Again, it is unlikely that WD40 would meet these requirements as a lubricant. Third, depending on the operating environment, the bearing will be prone to corrosion, particularly rusting.
Can you use WD40 to clean skateboard bearings?
You should never use WD40 to clean skateboard bearings . This is a product designed specifically made for removing rust and grime, not as a lubricant or cleaner for bearings. It works wonders at first, but you’ll find yourself reapplying more and more as it dries out bearings. Causing excessive damage down the road, meaning more money spent.
Does WD40 cause adhesive wear?
Based on the MSDS sheet, WD40 does not appear to contain such additives, which may result in fatigue and/or adhesive wear. Keep in mind that WD40 is manufactured and marketed as a household lubricant for those “small jobs” or as a rust remover.
Is WD40 a good lubricant for rust?
WD-40 isn’t actually a true lubricant. WD stands for “water displacing” and its main use is as a solvent or rust dissolver. The lubricant-like properties of WD-40 come not from the substance itself, but from dissolving components. WD-40 can be a good substance to start with — it can help clean up rust or other grime.